Mungo Main Catalogue

Insulation Fixings
MDD-S Insulation Fixing, steel nail
Applications
soft insulating materials, thermal insulation composite systems, thermal
insulation composite systems with rendering
Features
• European Technical Assessment according to ETAG014-
A/B/C/D/E - (L ≥ 135mm)
• European Technical Assessment according to ETAG014-
A/B/C - (L ≤ 115mm)
• Reduced point thermal transmittance to 0.001 W/K thanks to high
steel nail overmould, which decreases facade heat losses
• For all insulating materials
• For the fixings in all substrates (according to ETICS)
• Fixing system consisting of expansion plug with retaining disc
(Ø 60mm) and expansion nail with special head
• Excellent disc stiffness of 1.0 kN/mm
• In combination with MDD-VZ discs (Ø90mm) for soft insulating
material
• Suitable for insulation thicknesses up to 270 mm
• Short setting depth (ABCD = 25mm, E = 65mm)
• Shock resistant material
• For overhead applications please consult your local Mungo
application engineer
• Through fixing
Technical Data
Concrete C12/15
tension load (kN)
Concrete C16/20 -
C50/60
tension load (kN)
Brick
tension load (kN)
Calcium silicate
brick tension load
(kN)
Perforated calcium
silicate brick
tension load (kN)
Vertically perforated
brick (Hlz 12)
tension load (kN)
Aerated Concrete
tension load (kN)
Drilling depth
mm
Drilling depth
mm
Drilling depth
mm
Effective anchorage
depth mm
Effective anchorage
depth mm
Effective anchorage
depth mm
h0 A, B, C h0 A, B, C, D h 0 E h ef A, B, C h ef A, B, C, D h ef E
MDD-S (L ≤ 115mm) 0.43 0.43 0.43 0.43 0.32 0.21 - 35 - - 25 - -
MDD-S (L ≥ 135mm) 0.4 0.43 0.43 0.43 0.4 0.18 0.36 - 35 75 - 25 65
The partial safety factors of the resistances as well as a partial safety factor of the load of γF = 1.4 are considered / 1 kN ≈ 100 kg
Installation
5mm
126 www.mungo.swiss