Mungo Main Catalogue
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Metal Products<br />
MCSr Concrete Screw, stainless steel A4/316, ETA Option 1/Part 6<br />
Features<br />
• European Technical Assessment Option 1 for cracked and noncracked<br />
concrete<br />
• ETAG 001 - 06 - Approved for multiple use in cracked and noncracked<br />
concrete for non-structural applications and in prestressed<br />
hollow core slabs<br />
• Resistance under fire exposure F120 is part of the assessment<br />
• The anchor may also be used under seismic influence for performance<br />
category C1 + C2<br />
• Automatic hole cleaning with the innovative 2in1 Hollow Drill Bit (part<br />
of the assessment Ø8-14)<br />
• User-friendly, time-saving installation<br />
• 3 Setting depths<br />
• Allows adjustment or dismantling<br />
• All possible head version in range<br />
• Small edge and spacing distances<br />
• High loads<br />
• Guarantees a clean and uniform appearance<br />
• Through fixing<br />
• Outdoor applications<br />
Applications<br />
railings, hand-rails, consoles, profiles, substructures, steel constructions,<br />
wooden constructions, ventilation systems, pipes, high-racks<br />
Technical Data<br />
Non-cracked concrete Cracked concrete C20/25<br />
C20/25 tension load tension load (kN)<br />
(kN)<br />
Non-cracked concrete<br />
C20/25 shear load (kN)<br />
Cracked concrete C20/25<br />
shear load (kN)<br />
Min. distance betw.<br />
anchors mm<br />
Min. edge distance Minimum thickness of<br />
mm concrete member mm<br />
Clearance hole in<br />
fixture mm<br />
Installation torque<br />
(Nm)<br />
s min c min h min d f T inst SW<br />
Ø 6 0.6/1.9/4.3 0.6/1.0/1.9 3.2/4.0/4.0 2.4/2.8/4.0 35/40/40 35/40/40 80/80/80 8 10 13 T30<br />
Ø 8 3.6/5.7/7.6 2.4/4.3/5.7 4.9/6.6/8.8 3.4/4.6/6.1 40/50/50 40/50/50 80/80/80 12 20 13 T40<br />
Ø 10 5.7/9.5/12.4 4.3/7.6/9.2 6.6/19.4/19.4 4.6/15.2/18.4 50/50/50 50/50/50 80/90/102 14 40 15 T50<br />
The partial safety factors of the resistances as well as a partial safety factor of the load of γF = 1.4 are considered / The technical data is only valid for single fixings without consideration of edge and anchor distances / Only<br />
valid for setting depths according to assessment / 1 kN ≈ 100 kg / European Technical Assessment Option 1 for cracked and non-cracked concrete (≥ 6x50) / ETAG 001 - 06 - Approved for multiple use in cracked and noncracked<br />
concrete for non-structural applications (Ø 5 + 6)<br />
Installation<br />
Wrench size<br />
Drive<br />
www.mungo.swiss<br />
43