Mungo Main Catalogue

Metal Products
MSL Heavy Duty Anchor, ETA Option 1
Features
• European Technical Assessment Option 1 for cracked and noncracked
concrete
• Assessment of resistance under fire exposure F30-F120
• The anchor may also be used under seismic influence for performance
category C1 + C2 (M8-M24)
• Maximum safety with greater loading capacity
• Easy to disassemble
• Torque controlled expansion
• Rotation resistance stops the plug rotating in the drill hole
• Optimal expansion guaranteed by the coupling of the cone and body
• Uniform expansion
• Zinc plated > 5μm
• Through fixing
• Indoor applications
Applications
machines, cable trays, pipes, gates, substructures, railings
Technical Data
Non-cracked concrete
C20/25 tension
load (kN)
Cracked concrete
C20/25 tension
load (kN)
Tension load (kN)
C1
Tension load (kN)
C2
Concrete C20/25
shear load (kN)
Bending moment
(Nm)
Min. distance betw.
anchors/at edge
distance mm
Min. edge distance/
at distance betw.
anchors mm
Minimum thickness
of concrete member
mm
Installation torque
(Nm)
c ≥ 10xh ef s min /c c min /s h min T inst SW
M6 7.7 4.3 3.2 - 8 7 50/75 50/75 100 10 10
M8 10.9 5.7 5.7 5.8 14.9 17 60/90 60/90 120 20 13
M10 13.2 7.6 7.6 9.7 24 34 70/100 70/100 140 45 17
M12 19.8 11.9 11.9 9.7 28.6 60 80/150 80/150 180 80 19
M16 23.6 16.9 16.9 25.1 55.4 150 100/200 100/200 200 150 24
M20 33.6 23.9 23.9 41.7 71.4 310 125/250 125/250 250 170 30
The partial safety factors of the resistances as well as a partial safety factor of the load of γF = 1.4 are considered / The technical data is only valid for single fixings without consideration of edge and anchor distances / 1 kN
≈ 100 kg
Installation
Wrench size
www.mungo.swiss
39