Supplements EN-AT

Training
More efficiency in injection moulding.
Seminars Austria 2024

Seminar Facts
ENGEL Training Centre Austria
The ENGEL-Training Centre is designed within the customer Technical Centre in architectural unity with the “vitreous”
production hall. It offers modern multimedia based equipment, air-conditioned seminar rooms and a very special atmosphere,
which allows learning as a great experience. The Technical Centre with a total area of appr. 600 m 2 is equipped
with 6 production units (IMM/robot) - optimal preconditions to guarantee practical training.
Seminar duration: Daily from 8.30 a.m. - 4.00 p.m.
Seminar location: ENGEL Training Centre Austria in Schwertberg
Register
Online at www.engelglobal.com/training
Please register early (at the latest 2 weeks before the start
of the seminar) because the number of participants is limited.
No later than a week before seminar start you receive
a confirmation of participation with all data.
What we offer
Classroom trainng by qualified trainers
Seminar documents
Lunch and all drinks at break times
Confirmation of participation
e-learning courses
Information about dates and costs:
Details on training dates and prices can
be found in the seminar calendar or online.
For more information on e-learning courses please
contact us or visit our website.
We take care of you
Do you need a hotel for the duration of the seminar? We
would be pleased to suggest suitable accommodation in
the region. Hotel information will be sent to you with your
registration confirmation. Participants are asked to book
directly.
Please note
If your attendance is not possible for any reason - no
problem: of course we can cancel your reservation
until two weeks before the start of training free of charge.
If you cancel within two weeks before the start of training
we have to invoice 50%, within a week the whole amount
of seminar costs. However alternative participants can be
nominated at any time. We reserve the right to postpone or
cancel individual seminars or to take in new seminar dates.
Claims for compensation or drop out can not be generated
thereby.
Details & Registration
ENGEL Training Centre Austria
Trainingszentrum
Ludwig-Engel-Straße 1
A-4311 Schwertberg
Ms. Ulrike Hladky
Organisation, Registration
Phone: +43 (0) 50 620 3911
training.austria@engel.at
Mr. Robert Brandstetter
Consulting Customer training
Phone: +43 (0) 50 620 3920
robert.brandstetter@engel.at
More information
about ENGEL training

ENGEL training concept
Target-group oriented
Please find below an overview of the possible target groups and a suggestion of matching seminars
for each group.
Our training advisors are happy to help and can design an individualised programme for you.
Target group 1 Target group 2 Target group 3 Target group 4
Heads of production
Design engineers
Project managers
Set-up engineers
Machine operators
Sampling staff
Application
technician
Maintenance
personnel
Repair personnel
Career changers
From a different
department
Operating personnel
Production assistants
From a different
industry
Level: Basic Level: Basic Level: Basic Level: Basic
PIM
MO-L1
RO-L1-viper
RO-L1-easix
PIM
MO-L1
RO-L1-viper
RO-L1-easix
MTO
MTH-L1
MTE-L1
MTM
PIM
MO-L1
RO-L1-viper
Level: Advanced Level: Advanced Level: Advanced
PPS
MO-L2
RO-L2-viper
PMS
PQC
RO-L2-easix
PIQ
PPC
ESO
EIM
PPS
MO-L2
RO-L2-viper
PMS
PQC
RO-L2-easix
PIQ
PPC
ESO
EIM
MTE-L2-duo
MTE-L2-victory
RTM-viper
MTH-L2-duo
MTE-L2-em
MTH-L2-victory
ESO
Please note that we also offer additional product and technology related training in the areas of Foammelt,
Multi-component, PAC, INsert and Elast/LIM upon request.

Overview of the Seminar Program
Control January
Machine operation level 1 (MO-L1)
Operation of ENGEL injection moulding machines level 1 CC300 DE 09. – 10.
Machine operation level 2 (MO-L2)
Operation of ENGEL injection moulding machines level 2 CC300 DE 11. – 12.
Robot operation level 1 viper (RO-L1-viper)
Operation of ENGEL viper robots level 1 RC300 DE 15. – 16.
Robot operation level 2 viper (RO-L2-viper)
Operation of ENGEL viper robots level 2 RC300 DE 17. – 19.
Robot operation level 1 easix (RO-L1-easix)
Operation of ENGEL easix robots level 1 RC300 DE 22. – 23.
Robot operation level 2 easix (RO-L2-easix)
Operation of ENGEL easix robots level 2 RC300 DE 24. – 25.
Machine technical operation (MTO)
Operation of ENGEL injection moulding machines for maintenance personnel
CC300
Machine technical hydraulic level 1 (MTH-L1)
Hydraulic components on ENGEL injection moulding machines level 1
INJECT 4.0 & ENERGY EFFICIENCY
Machine technical hydraulic level 2 victory (MTH-L2-victory)
Hydraulic systems from ENGEL victory injection moulding machines level 2
Machine technical hydraulic level 2 duo (MTH-L2-duo)
Hydraulic systems of ENGEL duo injection moulding machines level 2
Machine technical electrical level 1 (MTE-L1)
Electrical and control technology of ENGEL injection moulding machines level 1
Machine technical electrical level 2 victory (MTE-L2-victory)
Electrical and control technology from ENGEL victory injection moulding machines level 2
Machine technical electrical level 2 duo (MTE-L2-duo)
Electrical and control technology of ENGEL duo injection moulding machines level 2
Machine technical electrical level 2 em (MTE-L2-em)
Electrical and control technology of ENGEL all-electric injection moulding machines level 2
Machine technical maintenance (MTM)
ENGEL injection moulding machine maintenance
CC300
CC300
CC300
CC300
PROCESS TECHNOLOGY
TECHNOLOGY
Robot technical maintenance viper (RTM-viper)
Control technology and maintenance of ENGEL viper robots
Process injection moulding (PIM)
Basic knowledge about injection moulding for newcomers DE 08. – 09.
Process mould change (PMC)
Tool change DE 11. – 12.
Process plastic surface (PPS)
Detection and correction of surface and spray defects DE 15. – 16.
Process iQ programs (PIQ)
Application of the ENGEL iQ programmes CC300 DE 17. – 18.
Process plasticizing competence (PPC)
Plasticising competence DE 19.
Process mould sampling (PMS)
Systematic tool testing and sampling DE 23. – 24.
Process quality control (PQC)
Quality assurance during injection moulding CC300 DE 25. – 26.
RC300
Energy efficiency injection moulding (EIM)
Energy efficiency and energy saving in injection moulding DE 16.
OPERATION
e-connect service operator (ESO)
Introduction e-connect and e-connect.24 DE 17.
MES authentic user (MAU)
Basic knowledge for operating the MES solution authentig
MES authentic key user (MAK)
Advanced training for the extended operation of the MES solution authentig

February March April May June July
DE 05. – 06.
EN 27. – 28.
DE 07. – 08.
EN 29.02. – 01.03.
DE 04. – 05. DE 02. – 03. DE 13. – 14. DE 18. – 19. DE 15. – 16.
DE 06. – 07. DE 04. – 05. DE 15. – 16. DE 20. – 21. DE 17. – 18.
DE 12. – 13.
DE 14. – 16.
DE 19. – 20.
EN 04. – 05.
DE 11. – 12.
EN 06. – 08.
DE 13. – 15.
EN 12. – 13.
DE 18. – 19.
DE 08. – 09. DE 23. – 24. DE 24. – 25. DE 22. – 23.
DE 10. – 12. DE 27. – 29. DE 26. – 28. DE 24. – 26.
DE 15. – 16. DE 03. – 04. DE 01. – 02.
DE 21. – 22.
EN 14. – 15.
DE 20. – 21.
DE 17. – 18. DE 05. – 06. DE 03. – 04.
DE 06.
DE 07.
DE 08.
DE 09.
DE 12. – 13.
DE 14.
DE 15.
DE 16.
DE 20.
DE 02.
EN 16.
DE 03.
EN 17.
DE 04.
EN 18.
DE 05.
EN 19.
DE 08. – 09.
EN 22. – 23.
DE 10.
EN 24.
DE 11.
EN 25.
DE 12.
EN 26.
DE 15.
EN 30.
DE 04. DE 16.
DE 05. DE 17.
DE 06. DE 18.
DE 07. DE 19.
DE 10. – 11. DE 22. – 23.
DE 12. DE 24.
DE 13. DE 25.
DE 14. DE 26.
DE 17.
DE 21. – 22. DE 16. – 17. EN 02. – 03. DE 18. – 19.
DE 29.02. – 01.03. EN 26. – 27. DE 07. – 08. DE 13. – 14.
DE 06. – 07.
EN 28. – 29.
DE 15. – 16. DE 17. – 18.
DE 11. – 12. EN 08. – 09. DE 03. – 04. DE 22. – 23.
DE 13. – 14. EN 10. – 11. DE 05. – 06. DE 24. – 25.
DE 15. EN 12. DE 07. DE 26.
DE 19. – 20. EN 16. – 17. DE 17. – 18.
DE 21. – 22. EN 18. – 19. DE 19. – 20.
DE 03.
EN 09.
DE 04.
EN 10.
DE 10.
DE 11.
On request!
On request!

August September October November December
DE 20. – 21. DE 16. – 17.
DE 22. – 23. DE 18. – 19.
DE 26. – 27. DE 23. – 24.
DE 28. – 30. DE 25. – 27.
DE 02. – 03.
DE 30.09. – 01.10.
DE 04. – 05.
DE 10.
DE 11.
DE 12.
DE 13.
EN 01. – 02.
DE 15. – 16.
EN 03. – 04.
DE 17. – 18.
EN 07. – 08.
DE 21. – 22.
EN 09. – 11.
DE 23. – 25.
EN 14. – 15.
DE 28. – 29.
DE 02. – 03.
EN 16. – 17.
DE 30. – 31.
DE 11. – 12. DE 10. – 11.
DE 13. – 14. DE 12. – 13.
DE 18. – 19. DE 16. – 17.
DE 20. – 22. DE 18. – 20.
DE 26. – 27.
DE 28. – 29.
DE 12.
EN 26.
DE 13.
EN 27.
DE 14.
EN 28.
DE 15.
EN 29.
DE 16. – 17. DE 18. – 19. EN 02. – 03.
DE 18. DE 20. EN 04.
DE 19. DE 21. EN 05.
DE 20. DE 22. EN 06.
DE 19. DE 24. DE 25. EN 09.
DE 20. – 21. DE 25. – 26. DE 26. – 27. EN 10. – 11.
DE 13. – 14.
DE 10. – 11.
EN 28. – 29.
DE 05. – 06.
DE 12. – 13. EN 30. – 31. DE 13. – 14. DE 12. – 13.
DE 30.09. – 01.10.
EN 04. – 05.
DE 18. – 19.
DE 02. – 03.
DE 04.
EN 06. – 07.
DE 20. – 21.
EN 08.
DE 22.
DE 27. – 28. DE 22. – 23. EN 11. – 12. DE 16. – 17.
DE 29. – 30. DE 24. – 25. EN 13. – 14. DE 18. – 19.
DE 22.
DE 23.
EN 07.
DE 14.
EN 08.
DE 15.
DE 12.
DE 13.
DE Language German EN Language English

C
and
CONFIRMED LEARNING SUCCESS
CERTIFIED
TRAINING CENTRE
Highest quality level for trainers
training centres Worldwide.
Training Team – ENGEL Austria
Astleitner Manfred
Trainer
Wilke Mario
Trainer
Gratzl Paul
Trainer
Ruemer Martin
Trainer
Hitz
Thomas
Trainer
Haderer
Hermann
Trainer
Rieß-Friedinger
Markus
Trainer

EN 2023-09
ENGEL AUSTRIA GmbH | Ludwig-Engel-Straße 1 | 4311 Schwertberg, Austria
phone +43 50 620 0 | Fax +43 50 620 3009 | training.austria@engel.at | www.engelglobal.com
The information, product features and pictures contained in this brochure are intended exclusively as a technical guide. ENGEL is not responsible for any
technical changes or print/typographical errors . Reproduction in whole or in part is prohibited without the prior written consent of ENGEL AUSTRIA GmbH.