30.01.2024 Views

ST2401

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Case Study<br />

Object Archive and Tape<br />

Our Back-Up Wash Service Guarantees Data Security<br />

As a trusted IT and Technology partner, Bluetron assembles high-tech systems and data centres<br />

and is able to execute each phase of their life cycle optimally. This includes repair and maintenance,<br />

refurbishment, remanufacturing, reuse, and recycling. Bluetron provides sustainable profitability,<br />

quality, and risk mitigation in three digital domains: Electronics, IT-Infra and Data.<br />

The Challenge<br />

The idea was born out of the recurring news that the number<br />

of ransomware attacks on companies is continuously increasing.<br />

“We were searching for a software which could support a long<br />

retention period and a way to prevent vendor-lock-in”, Edwin<br />

Theunisse, Business Consultant at Bluetron explains. Bluetron<br />

as a data centre, was looking for a data storage solution for their<br />

customers – as solid as an offline vault but still very proactive,<br />

flexible, and easy to use. The tailor-made solution that Fujifilm<br />

and Bluetron developed in cooperation enables Bluetron to offer<br />

customers their patented 100% Data Guarantee solution.<br />

The Solution<br />

The unique solution feature is that data stored on tape can be<br />

checked for viruses and versioned, which means it’s replaced<br />

by older versions if infected. Based on Bluetron’s idea, Fujifilm<br />

developed a backup-wash-service, which checks data for viruses<br />

before it’s saved on tape. The whole process is coordinated by a<br />

master control programme. The data is then stored on FUJIFILM<br />

Object Archive as the storage back-end. Every time a file is<br />

changed at the client’s site, the appliance front-end sends a newer<br />

version to Bluetron. The previous version is stored in the FUJIFILM<br />

Object Archive system. This means that if a virus is found in the<br />

latest version of a file, FUJIFILM Object Archive is used to retrieve<br />

the older version of the file and scan that version. This implies a very<br />

long retention period at the file level.<br />

To protect their customers’ data as much as possible, another<br />

appliance front-end is installed at Bluetron, which replicates data<br />

to Fujifilm’s high-security datacentre, where a copy of the data<br />

is stored with an air-gap, disconnected from any network. The<br />

customised solution ensures that Bluetron’s clients are quickly<br />

operational again after a ransomware attack, with their IT and<br />

operational data fully screened for malware and viruses with the<br />

latest definitions. By storing data on tape using FUJIFILM Object<br />

Archive, Bluetron is equipped to provide its customers with the<br />

security and reliability required.<br />

Innovative Data Storage Solution<br />

03<br />

01<br />

1st Copy<br />

02<br />

04<br />

05<br />

Backup Wash<br />

FUJIFILM Datacentre<br />

(FAS)<br />

Customer<br />

06<br />

2nd Copy<br />

01<br />

02<br />

03<br />

04<br />

05<br />

06<br />

Data is received from a hard disk environment, via the<br />

appliance front-end at the customer’s site.<br />

Whenever there is an update on the anti-virus definitions, the<br />

system will automatically restore the latest dataset from tape<br />

and rescan the data to find potential threats that were not<br />

previously discovered.<br />

If the result doesn’t show any signs of a virus, this data is<br />

stored on tape on Bluetron’s storage system with FUJIFILM<br />

Object Archive.<br />

At the same time, the data is sent to Fujifilm’s high-security<br />

datacentre where it is stored on tape.<br />

After Fujifilm has imported all of the data, Bluetron receives<br />

a signal that the storage process is complete. The customer<br />

will be notified about the 100% Data Guarantee via the<br />

appliance front-end once the above-mentioned process is<br />

successfully carried out.<br />

When data recall is requested, the data will be scanned with<br />

the latest virus definitions using Backup Wash. The data is<br />

safely recalled to the customer.<br />

The reason for choosing the FUJIFILM Object Archive software was not only made on price, but on the total solution we built together with<br />

the team. Fujifilm’s sales and technical teams were very creative and flexible in getting our total solution built. The support from Fujifilm was<br />

professional and flexible and the installation of the OA system was without any big hiccups. The collaboration was and is very pleasant.<br />

Ronald Niënhaus, Strategic Growth Manager<br />

How can we support you?<br />

Please contact us<br />

Sarah Taylor<br />

07785 505992 sarah.taylor@fujifilm.com<br />

Scan to visit the<br />

Object Archive website

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!