Section 06 Custom Chrome Europe Catalog 2024

More documents

Recommendations

Info

681988 6 motogadget mo.Flash Relay • Incredibly small and lightweight - just a cable with a tiny device the size of a mint • Perfect for <strong>Custom</strong> Bikes with limited space – no more clumsy OEM flasher relay • Laying cables together with the mo.Flash inside a handlebar, frame tube or directly on the wiring loom • Completely load independent (widerange indicator relays) – always stable and correct flash rate • Suitable for all flasher types: LED, Micro size, 10 Watt, or 21 Watt • No bulky load resistors necessary • It works with 1 or 2 or 4 flashers in use • Instant, loss less flash light operation • Very easy to install – just connect the two wires • Completely waterproof • Short - circuit - proof • Automatic overload shut down • Safe against high voltage spikes • Generates no heat during operation • Operating voltage from 5V to 18V • Also suitable for 6 V vehicle voltage systems • Made by motogadget in Germany 681988 MG RELAY mo.Flash motogadget mo.Relay+ The mo.Relay+ is a true combination of a load independent digital turn signal relay with push button functions. 4 modes are available by pushing the buttons in different time frames: • Changing lines: short fingertip on the button - turn signal flashes 3x, automatic shut off after 3rd flash • Turning: short push of the button - flashes 10x, automatic shut off after 10th flash • Permanent: push longer the button - will turn off after second push of the button when needed • Hazard warning flasher by pushing both buttons for left and right side together The m-Relay+ is load independent (1-100W) and works with almost every possible light combinations such as LEDturn signals, micro-turn signals, halogenturn signals, 10W or 21 Watt filament lamps and delivers a constantly stable flash mode. Bright and efficient turn signal lights caused by a very efficient microelectronic. 653346 m Relay+ mo.Relay - a small electronic relay to switch high current devices with tiny loads The mo.Relay is a small, compact relay to switch almost all kind of devices like e.g. horn, ignition etc. The mo.Relay moves high loads and currents directly to the switched devices (the front lamp for example). Thus enhances electrical reliability of your bike and reduces voltage drops in power supply significantly. The load und current at the handle bar switch gear and also at the ignition lock is reduced to a minimum. So you can use cables with very small diameter at the switch gear. Damaged and scorched contacts or cables will never happen again. The absence of voltage drops let shine your lights much brighter and enhances your security on the road. A threaded hole in the center of the housing enables fast and easy mechanical installation almost anywhere at the bike - especially when you use multiple units. The housing of the mo.Relay is CNC machined and black anodized. It is internally molded and completely water proof and vibration resistant. Two red cables allow the connection of devices for 12V power supply and up to 20A load current. The two black cables allow the connection of the switch gear. Please note! the mo.Relay is not intended as a control unit for push button gear. Outer diameter 19 mm, Hight without cable 19mm 682834 MG mo. relay 12V 20A 682347 682346 Spare parts for mo.Lock The mo.Lock is a contact free digital ignition lock with RFID technology and substitutes mechanical ignition locks or their electrical switching feature respectively. • RFID technology is tamper-resistant • each key has a unique code • the key first activates the mo.Lock without touching it and then, via the relay, the entire on-board system • neither key nor mo.Lock suffer from mechanical wear • the key requires no battery - failsafe • no overload or scorched pins possible due to indirect switching via the 40 A main relay • the mo.Lock is very compact an can be mounted hidden in many places • water tight and vibration resistant because of the moulded-in construction • depending on the model, key sizes range from very small (key fob sized) to tiny (glass vial) and may be integrated into other objects like gloves, clothing, pendants (NON- METALLIC!) etc. • keys can be easily purchased and 'learned' to any mo.Lock - your integrated locksmith • a switching distance of 4 - 5 cm ensures convenient switching while excluding the possibility of accidental engagement • An integrated LED shows the status of the mo.Lock while mounting, connecting and 'teaching' new keys Dimensions and specifications Transmitter/receiver, diameter of installed assembly: 30 mm, Height: 14 mm, Cable length: approx. 50 cm, Weight incl. cable: approx. 30 g, Fixture: 2 x M3 threaded hole on back side, Operating voltage: 6V - 18V, Operating temperature: -20 °C... +80 °C Parts delivered Transmitter/receiver, diameter of installed assembly: 30 mm, Height: 14 mm, Cable length: approx. 50 cm, Weight incl. cable: approx. 30 g, Fixture: 2 x M3 threaded hole on back side, Operating voltage: 6V - 18V, Operating temperature: -20 °C... +80 °C Spare parts 682346 mo.Lock key teardrop 682347 mo.Lock key glass tube 682348 mo.Lock relay 12V 50A 682349 mo.Lock backing capacitor 6.20
APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS mo.lock NFC Ignition Switch • NFC technology is tamper-resistant • Each key has a unique code • The key first activates the mo.lock without touching it and then, via the relay, the entire on-board system • Neither key nor mo.lock NFC suffer from mechanical wear • The key requires no battery • No overload or scorched pins possible due to indirect switching via the 40 A main relay • The mo.lock NFC is very compact an can be mounted hidden in many places • Water tight and vibration resistant because of the moulded-in construction • Keys can be easily purchased and ‚learned‘ to any mo.lock NFC - your integrated locksmith • A switching distance of 2 - 4 cm ensures convenient switching while excluding the possibility of accidental engagement • An integrated RGB-LED shows the status of the mo.lock while switching, connecting and ‚teaching‘ new keys • Included parts: mo.lock NFC, 2 keys, 1 automotive relay, 12V/40A, Detailed installation and operating instructions Part#: 924915, Field of Application: We do not recommend using the mo.lock in conjunction with an immobilizer. Please ask your dealer whether the immobilizer can be deactivated., Color: Black, Unit: Set, Qty.: 1 mo.lock NFC Full Wiring Kit As a complete solution, the mo.lock wiring harness enables very quick and easy installation of the mo.lock in the vehicle‘s onboard network. Simply plug the relay supplied with the mo.lock into the appropriate relay socket on the wiring harness, connect three prepared cables to the mo.lock and connect two eyelets to the battery poles - done! No soldering or crimping is required. All cables are pre-assembled and the integrated 40A main fuse protects the new electrical system centrally and safely. • Cable from relay via fuse to +12V and ground: 60 cm • Cable from relay to mo.lock NFC: 150 cm • Cable from relay to vehicle electrical system: 150 cm • integrated relay socket • integrated 40A main vehicle fuse • pre-assembled battery connection (M6 eyelets) Part#: 924916, Unit: Set, Qty.: 1 mo.lock NFC Replacement Key The mo.lock NFC key is a replacement key for the mo.lock NFC ignition lock. Up to 125 keys can be trained on a mo.lock. Teaching in additional keys requires at least one key that has already been taught in. Part#: 924918, Unit: Each, Qty.: 1 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES mo.lock NFC Replacement Bracket Part#: 924919, Color: Black, Unit: Each, Qty.: 1 FRAMES FORKS & SHOCKS SHEETMETAL mo.lock NFC Connection Cable The mo.lock NFC connection cable is a high-quality, 2m long, 3-wire cable for connecting the mo.lock NFC and fits the cable cover included with the mo.lock. Part#: 924917, Unit: Each, Qty.: 1 INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 6.21
Page 1 and 2: 6 ELECTRICAL www.custom-chrome-euro
Page 3 and 4: APPAREL SEATS & TOURING BEFORE Copp
Page 5 and 6: APPAREL 893126 893127 SEATS & TOURI
Page 7 and 8: APPAREL 670026 670027 670076 670028
Page 9 and 10: APPAREL JST Tab • JST 6-position
Page 11 and 12: 85091 APPAREL SEATS & TOURING Mate-
Page 13 and 14: APPAREL 17720 17728 SEATS & TOURING
Page 15 and 16: APPAREL SEATS & TOURING 920465 9204
Page 17 and 18: APPAREL SEATS & TOURING FOOT CONTRO
Page 19: APPAREL 920478 920479 SEATS & TOURI
Page 27 and 28: APPAREL Automatic Daytime running l
Page 29 and 30: APPAREL SEATS & TOURING 893338 Head
Page 31 and 32: APPAREL 893233 SEATS & TOURING 6708
Page 33 and 34: APPAREL 664120 SEATS & TOURING FOOT
Page 35 and 36: APPAREL 664132 893357 893364 SEATS
Page 37 and 38: APPAREL 920489 895428 SEATS & TOURI
Page 39 and 40: 17715 26447 APPAREL 17716 26440 SEA
Page 41 and 42: APPAREL 12251 12286 SEATS & TOURING
Page 49 and 50: APPAREL MotorFactory Ignition Coils
Page 51 and 52: APPAREL SEATS & TOURING Dynatek Dyn
Page 59 and 60: APPAREL SEATS & TOURING Copper Plus
Page 63 and 64: A B C D E APPAREL SEATS & TOURING 6
Page 71 and 72:
APPAREL SEATS & TOURING Compu-Fire
Page 73 and 74:
APPAREL 893531 893514 SEATS & TOURI
Page 75 and 76:
APPAREL 28627 SEATS & TOURING 28626
Page 77 and 78:
APPAREL 25046 668378 Starter Soleno
Page 79 and 80:
APPAREL SEATS & TOURING 28151 28152
Page 81 and 82:
APPAREL 921781 921776 921782 SEATS
Page 83 and 84:
APPAREL SEATS & TOURING FOOT CONTRO
Page 85 and 86:
APPAREL SEATS & TOURING FAMILY FITM
Page 87 and 88:
PART# BATTERY TYPE OEM # COLD CRANK
Page 89 and 90:
Page 91 and 92:
APPAREL 895143 895140 SEATS & TOURI
Page 93 and 94:
APPAREL SEATS & TOURING Stereo Acce
Page 95 and 96:
Page 97 and 98:
889721 889711 APPAREL SEATS & TOURI
show all

Section 06 Custom Chrome Europe Catalog 2024

Create successful ePaper yourself

Delete template?

Save as template?