Megaplex-4100

Installation and Operation Manual Chapter 5 Configuring Typical Applications
MP-4100
Configuration>Physical Layer>IO>I/O-3 (M8E1)>E1>Link 1 (Down)
1. Admin Status (Up)
2. User Name ... ()
3. Line Type > (Unframed)
4. Redundancy > (None)
5. Rx Gain > (Short Haul)
6. Data OOS[0 - ff] ... (00)
7. Restoration Time > (CCITT)
8. Cross Connect (DS1)
9. Destination Slot > (IO-3 (M8E1))
10. Destination Port > (-)
11. Interface Type (Balance)
7. Repeat Step 6 for links 2 to 4.
8. Repeat Step 6 for I/O slot 6.
Configuring Bundles
1. Add an MLPPP bundle with eight E1 links to I/O slot 1:
1. Open Configuration>Logical Layer>Bundles.
MP-4100
Configuration>Logical Layer>Bundles
1. Slot > (IO-1)
2. Bundle[1 - 32] ... (1)
2. Type a to add a bundle to the M8E1 module in I/O slot 1.
MP-4100
Configuration>Logical Layer>Bundles
Rate(Kbps)[64 - 16384] (16384)
1. Slot > (IO-1)
2. Bundle[1 - 32] ... (1)
3. Admin Status (Up)
4. User Name ... ()
5. L2 Protocol > (MLPPP)
6. MLPPP MTU[80 - 1600] ... (250)
7. Link OAM (Disable)
8. Number Of Links[1 - 8]... (8)
9. Source Slot > (IO-1)
10. Source Port > (Link 1)
... (N)
3. Type N to display next page, which displays the other source ports.
Megaplex-4100 Ver. 2.0 Configuration Procedure for Typical Ethernet Transport Application 5-33