Megaplex-4100

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
� To select the test type:
On the virtual port test control screen for the selected module port, select Test
Type and then press . The current test appears in the header. For a list of
the available options, refer to the module Installation and Operation Manual.
Diagnosing the CL.1/155 and CL.1/155GbE Virtual Ports
� To select a CL module and test target:
Diagnostics>Logical Layer>CL
>
1. CL-A >
2. CL-B >
1. Select CL on the Logical Layer diagnostics selection screen, and then press
.
2. You will see the CL module selection screen. A typical screen is shown in
Figure 6-104.
MP-4100
%-Db Update; #-Db Undo; $-Sanity
ESC-prev.menu; !-main menu; &-exit; @-output 1 M/ 1 C
-----------------------------------------------------------------------------
Figure 6-104. Typical Virtual Port Diagnostics CL Module Selection Screen
3. Select the desired CL-A or CL-B module on the CL module selection screen,
and then press . You will see the test type selection screen for the
corresponding CL.1/155 or CL.1/155GbE module. A typical screen for CL-A is
shown in Figure 6-105.
Megaplex-4100 Ver. 2.0 Testing Megaplex-4100 Operation 6-157