Controlled Environment Systems for High ... - Bioscience Tools

Miniature Accessories For Custom Adjustable
Holders
The sets below allow you build adjustable holders for any purpose. The example on the left is an adjustable
magnetic stand-holders for an in vivo heated plate constructed using x4 MTH1 bases, x4 1in. extensions,
x4 right-angle clamps MH-RA, and a threaded rods set, MH-TRDS. The stands can be elevated to
the required heights to accommodate different size animals.
Mounting Adapter Allows you to attach MTH, MMH and ZMM miniature holders to un-
threaded non-magnetic surfaces with through holes. Item#: MTH-SCR
Microscope Adapter, Stainless Steel, MA A microscope stage adapter to pro-
vide flexible working area for positioning accessories required for high resolution live sample imaging:
from media exchange and test solution delivery tubing, to sensors and electrodes. Specially treated stainless
magnetic surface of the adapter provides ideal means to mount miniature adjustable magnetic holders.
Adapters for all brands of microscopes, including motorized stages, are available. Incorporates adjustable
clamp to fix all brands of 35mm petri dishes and chambers, glass bottom dishes (both 35 and 50mm), and
heating stages. Choose the size appropriate for your microscope.. Item#: MA
• Inside opening: 50mm
• Reducing ring and clamp: to fit all brands
of 35mm dishes
• Use with: 35mm dishes (including glass bottom
dishes), chambers, 50mm glass bottom
dishes, and heating stages.
Adjustable Tilt Miniature Magnetic Base, MTH1 This adjustable base
can be used to fix your miniature accessories, from tubing and manifolds to electrodes and sensors, right
on your microscope stage. Measures only 3/4in. in diameter and height. Removable tilting part allows
you to attach different extensions. Requires a magnetic microscope adapter. The magnet can be removed
to mount on included screw-type adapters for M6 and 1/4-20 threaded surfaces. This is a part of MTH
system. Item#: MTH1
Extension with Double Tubing/Electrode Clamp, MTH-T This exten-
sion fits inside MTH1 base to provide means to fix your electrodes, tubing and sensors around your
sample. Extends up to 3in. This is a part of MTH system. Item#: MTH-T
Miniature Ball-Joint with Right-Angle Extension, MH-RB
This adjustable extension can be used to position your miniature accessories in any direction and angle.
The right angle attachment provides extra freedom to adjust height and length. Ideal to fix tubing above
your sample. Incorporates tubing clamp. Can be used to attach double tubing/electrode holder/clamp of
MTH-T as well. Extends up to 2in. Does not obstruct optical field. This is a part of MTH, MH-1 and MH-
2 systems. Item#: MH-RB
Extensions Set, 1in.long, and Right-Angle Extension MH-E
This set of two 1in. long extensions includes thumb screws and nuts to extend your accessories to the
required length. The right-angle extension provides extra flexibility for adjustment in 3-D space. Item#:
MH-E
50 www.biosciencetools.com