Controlled Environment Systems for High ... - Bioscience Tools

Miniature Incubator for micro-fluidics devices and chambers TC-
MIW For use with any chamber or plate. Incorporates heated bottom, luer-lock port for gas mixture (to
control CO2 or hypoxia), and heated cover, to prevent condensation. Built-in multiple ports for tubing and
accessories (probes and sensors). The chambers and devices can be formed directly on the glass bottom. One
removable side provides multiple openings for tubing. Fits all brands of motorized stage and Zeiss type K
stages. Can be used with a set of adjustable tubing holders to position perfusion tubing for continuous media
exchange, provided optional inserts TC-I- 00 or TC-I-4/3 are placed inside, and miniature holders MH-MIS
are attached. The bottom is closed (for open bottom incubator, to access with immersion objective - consider
another model TC-MWP). Can be used for long-term imaging. Item#: TC-MIW
• Outside dimensions: Fits 60x
cutout of motorized stages
0mm
• Use with: Standard multi-well plates,
35mm dishes, and x3in. glass coverglasses/slides,
large chambers
• Condensation free cover: Uses a
built-in temperature sensor to connect
independently to the second channel
of temperature controllers, 8 x 2 mm
optical window
• CO2 port: Luer-lock connector to a
source of gas mixture: CO2-MI or PC-
MI controller
• Media exchange and perfusion:
multiple sealed inflow ports, a set of
adjustable tubing holders to position
inflow and outflow tubing inside
sample chambers
• Heated bottom: mm glass
• Stability: 0.0 °C
A set of tubing with luer-lock fitting and stainless steel needle attached
x8, TC-MIW-FIT Can be used with adjustable holders MH-MIS to provide inflow and
outflow to chambers and dishes placed inside incubator. The holders are attached to optional inserts TC-I-4/3
or TC-I-100. Tubing fits through openings on sides of the incubator. The stainless needle attached to one
end of the tubing can be bent to fit inside chambers and dishes. For use with perfusion or continuous media
exchange systems.. Item#: TC-MIW-FIT
Closed Controlled Environment Chambers for microfluidics devices
Catalog No. Description Price
TC-MIW
Miniature Incubator for micro-fluidics devices and chambers
$495
TC-MIWL
Miniature Incubator for micro-fluidics devices and chambers,
low profile
A metal insert, to position adjustable holders, can be
$495
TC-I-4
used with x4 dishes and chambers up to 38mm diameter,
reducing adapters might be required for different brands.
$95
TC-I-3
A metal inserts, to position adjustable holders, can be used
with slides and coverglasses
$95
TC-I-100
Set of metal inserts, to position adjustable holders, can be
used with chambers up to 100mm diamete
$95
MH-MIS
Set of miniature adjustable tubing and sensor holders, x3,
includes 4-40 threaded posts
$95
TC-MIW-FIT
A set of tubing with luer-lock fitting and stainless steel
needle attached x8
$95
6 www.biosciencetools.com