Controlled Environment Systems for High ... - Bioscience Tools

Call 1-877-853-9755
Accessories
Additional 1.5ms Valve Upgrade Adds an additional .5 ms valve to your PS25 or
PS 5 system. Send us the valve box and we install the valves for you. Item#: PS15-ADD
Cable to Link Multiple Controllers . Allows you to connect additional enhanced
controller to the same computer port. Plugs into DB-9 connectors on the back of the controllers. Up to ten
different controllers can be connected to the same computer port. Can be used with our PC- 6-232UP,
CFPS-UC2, CFPS-UC8 and TC-2D controllers. Two feet long. Longer cables are available. Item#:
232UP-C
Cable to Connect to PS25, PS15 or PS-8 Perfusion System Allows you
to control eight channels of PS25, PS 5 or PS-8 valve switching system through CFPS-U2 controller (or
2x8 channels through CFPS-UC8 controller). Can be also used with PC- 6-232UP controller to expend
the system up to 32-channels by connecting to 2 additional PC- 6 controllers. Use your software and
the same computer port to expend your setup. By switching additional tubing lines you can add different
solutions to your sample through the same flow control unit. Plugs to DB-9 connectors on the back of the
controllers. Two feet long. Longer cables are available. Note: cannot be used with CFPS-C8 controller.
Item#: DB9-C
Adapter USB to RS232 Allows you to connect through a computer USB port. Creates a
virtual RS232 (COMn) port, so that you can program the controller using your standard software. Item#:
CFPS-USB
Cable to Connect Perfusion Systems to Imaging Systems A custom
cable to fit your imaging system. Used with imaging software to control perfusion systems for automatic
liquid handling and test solution applications. Specify imaging package used or define required connectors.
Item#: DB9-IMG
Pressure Controllers
Provides consistent and define solution flow. For use with small volume delivery SVDS1 and pressure cylinders
PC. Generates pressure up to 5PSI (does not require an external source of pressure). The controller
regulates output pressure to provide consistent defined solution flow through sample chambers and microfluidics
chips (prevents flow blockage by bubbles inside solutions). If connected to a solution switch, the
controller starts automatically every time perfusion is ON. Simple to use. If used with perfusion systems,
the solutions do not need to be eleveated for gravity drive. Item#: PC-R15
• Output: max 5PSI
• Connectors: Easy-connect, 5/32in. (4mm)
O.D. tubing
• Indicators: PRESSURE digital indicator,
output LOW, output CLOSE
• Controls: CLOSE manual switch,
CLOSE TTL input (+5V to start),
OUTPUT PRESSURE settings,
MANUAL dial to SET pressure,
EXTERNAL input to SET pressure,
MONITOR pressure - analog output
• Dimensions: 6 x 2.5 x 9in.
• Power: Includes external 20/230VAC power
supply
75