TF 610 Instruction manual - Toshiba
TF 610 Instruction manual - Toshiba
TF 610 Instruction manual - Toshiba
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation<br />
Setting dialling method<br />
There are two dialling methods. The<br />
pulse-dialling method is normally used in<br />
the public switched telephone network. If<br />
your fax machine is connected to a<br />
PABX*, the DTMF dialling method may<br />
also be used. As the public network is<br />
modernised, this dialling method may also<br />
be used in the public network. If you are<br />
in any doubt, first try the pulse-dialling<br />
method (basic setting).<br />
If the dialling procedure fails, try DTMP<br />
dialling. How ever DTMF is the most<br />
efficient.<br />
✽ ) This function may not be available in<br />
machines in certain countries.<br />
14<br />
✽<br />
15-03 19:56 M 100%<br />
PROGRAM SETUP DATA<br />
2 x<br />
PARAMETER NUMBER =_<br />
ENTER<br />
DIAL METHOD TONE<br />
DIAL METHOD 10PPS<br />
ENTER<br />
STOP<br />
Standby mode<br />
Start the menu<br />
Select submenu (2x)<br />
Make your selection<br />
Enter function number<br />
Confirm with ENTER<br />
Set dial method<br />
Example: Tone<br />
Page through the menu...<br />
...until you reach the desired menu item<br />
Example: 10PPS<br />
Confirm with ENTER<br />
Press STOP, return to standy<br />
mode<br />
GB Installation<br />
TOSHIBA <strong>TF</strong> <strong>610</strong>
Change language