TF 610 Instruction manual - Toshiba
TF 610 Instruction manual - Toshiba
TF 610 Instruction manual - Toshiba
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced settings<br />
Temporarily activate TX<br />
report<br />
If output of the TX report is restricted with<br />
function function 02 02 (see page 59), a general<br />
printout of the TX report can be requested<br />
for a set transmission job.<br />
Remote maintenance<br />
(COMLINE)<br />
Your fax machine permits remote<br />
diagnosis. This means that the internal<br />
settings can be read and changed via a<br />
telephone line. In order to ensure that<br />
data protection is assured, COMLINE is<br />
possible only after you enable your<br />
machine for this facility.<br />
60<br />
DOCUMENT SET<br />
TX REPORT<br />
TX REPORT ON<br />
ENTER TEL NUMBER<br />
TEL: 12345<br />
START<br />
15-03 19:56 M 100%<br />
2 x<br />
PARAMETER NUMBER =_<br />
ENTER<br />
RDC ACCEPTANCE OFF<br />
RDC ACCEPTANCE ONE<br />
ENTER<br />
STOP<br />
Load original<br />
Remember:<br />
Printed side face down<br />
Document ready<br />
Press TX report key<br />
Preparation of TX report printout<br />
Enter fax number<br />
or enter alphabet dial or one-touch dial<br />
number<br />
Confirm with START<br />
Document is transmitted, and TX report is<br />
then printed out<br />
Standby mode<br />
Start the menu<br />
Select submenu (2x)<br />
Make your selection for the function<br />
number<br />
Enter function number<br />
Confirm with ENTER<br />
Current setting<br />
Change setting<br />
Confirm with ENTER<br />
Press STOP, return to standby<br />
mode<br />
GB Advanced settings<br />
TOSHIBA <strong>TF</strong> <strong>610</strong>
Change language