Characteristics of the Sorvall Legend XT/XTR - Fisher Scientific

More documents

Recommendations

Info

3 Control panel Keys Keys Control Panel The keys allow user intervention for controlling the operating mode as follows: Key Display contents Start Stop Open lid Pulse Directory Bucket Braking and Acceleration curve Changing the display mode Normal start of the centrifuge End run manually Release (possible only when device is switched on). Release during power failure: see “Mechanical Emergency Lid Release” on page 7-2) By pressing the "Pulse" key the centrifuge starts immediately and accelerates up to the end speed. Releasing the key initiates a stopping process at the highest braking curves. Use the directory key in order to modify the displayed value Use the bucket key in order to have all available bucket types displayed in succession. Use the ACC DEC key to toggle between braking and acceleration curves. Use the Change key to change the display mode. (speed / RCF value, sample / chamber temperature, run time counter from start or preset speed on) The control panel contains the keys and displays of the centrifuge (only the power switch is located on the back of the device). All parameters can be selected and changed during operation. 3-2 Sorvall Legend XT / XTR Thermo Scientific
Program selection keys PULSE key Display OPEN key 3 Control panel Control Panel Thermo Scientific Sorvall Legend XT / XTR 3-3 ENTER key Start key Temperature key TIME key SPEED key Numeric pad STOP key Changing the display mode Chamber / Sample temperature Bucket selection key Braking and Acceleration curve Change display mode Running time / remaing time Directory key Changing the display mode Speed / RCF
Page 1 and 2: Thermo Fisher Scientific Sorvall Le
Page 4 and 5: WEEE Conformity This product is sub
Page 6 and 7: Contents Chapter 5 System Menu ....
Page 8 and 9: Preface Accident Prevention Precaut
Page 10 and 11: Preface Maximum sample density at m
Page 12 and 13: 1 Introduction and Description Char
Page 14 and 15: 1 Introduction and Description Dire
Page 16 and 17: 1 Introduction and Description Roto
Page 18 and 19: 2 Before use Before Setting up Befo
Page 20 and 21: 2 Before use Storage Storage 4. Mak
Page 24 and 25: Operation Contents • “Switch on
Page 26 and 27: Rotor Installation The approved rot
Page 28 and 29: Preselecting Speed / RCF 4 Operatio
Page 30 and 31: Preselecting the temperature You ca
Page 32 and 33: Bucket radius Having entered the bu
Page 34 and 35: Stopping the centrifugation program
Page 36 and 37: System Menu To enter the system men
Page 38 and 39: Maintenance and Care Contents •
Page 40 and 41: Disinfection Clean centrifuge and a
Page 42 and 43: Autoclaving 4. Grasp the rotor with
Page 44 and 45: 7 Troubleshooting Mechanical Emerge
Page 46 and 47: 7 Troubleshooting Troubleshooting b
Page 48 and 49: 7 Troubleshooting When to contact C
Page 50 and 51: A Chemical Compatibility Chart CHEM
Page 52 and 53: A Chemical Compatibility Chart CHEM
Page 54 and 55: A Chemical Compatibility Chart 1 Po
Page 56 and 57: B Contact Information Spain +34 932
Page 58: Index: Running Time Preselection ..

Characteristics of the Sorvall Legend XT/XTR - Fisher Scientific

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?