OFFROAD

8
sxs sUsPEnsIon»
(A) (B)
5200.0090 ALL UsD FoRks ø 48 mm (A)
5200.0091 ALL UsD FoRks ø 48 mm (B)
FoRk PRoTECTIon sTICkER sET
Extra thick material, protects
your fork against stones.
sxs.08.300.040
sxs knoB ADjUsTER sET
CNC machined aluminum.
780.04.905.000
sx 08 – 10
xC / xC-W / ExC 08 – 11
sx-F 450 07
772.04.905.000
sx 11
PRE-LoAD ADjUsTER REAR sHoCk
Make on the fly pre-load adjustments with just
a T wrench. Some advantages of the adjuster are:
– mechanical drive mechanism
– full thread range can be used
– quickly adjustments between motos
– light weight
To install the pre-load adjuster, the PDS shock
must be disassembled.
U690.9807 CLosED CARTRIDGE
sx / xC 07 – 11
sCREW CAP REMoVAL TooL
This is the tool you need to remove and install the
screw cap from your fork caps. Fits all KTM WP
closed cartridge forks.
773.12.066.000
CLosED CARTRIDGE
FoRk AIR PUMP
Use this tool to fine-tune your closed cartridge
forks. The fork-pump allows you to adjust the
pressure of the compression damping very
accurately.
780.01.095.000 ALL UsD ø 48 mm
nEoPREnE FoRk CoVER
The perfect neoprene protection for
your forks, for use with closed fork
protection.
595.04.090.050
nEoPREnE PDs PRoTECToR
Increases the life-span of
the PDS lower bearings.
595.01.095.000 ALL UsD ø 48 mm
595.01.095.100 ALL UsD ø 43 mm
nEoPREnE FoRk CoVER
The perfect neoprene protection for your
forks, for use with open fork protection.
4860.0074.s9
xC-W / ExC 07 – 11
PRE-LoAD ADjUsTER sET
Pre-load can be adjusted with ease.