2012 Product Guide « - Kontron

COM mini » COM Express® mini «
COM Express®
mini
« Express® »
New Pin-out Type 10 added
COM Express® mini Pin-out Type 10
Formerly known as nanoETXexpress: The COM Express®
mini is designed to deliver power-saving Computer-on-
Modules with high performance x86 technology on a
footprint that is the size of a credit card - a mere 55
x 84 mm. The ultra small Kontron COM Express® mini
module is available following either COM Express®
Type 1 or Type 10 pin-out definition. COM Express®
mini modules are ideal for ultra-mobile applications
that require energy-saving x86 processor performance,
high-end graphics, PCI Express and Serial ATA combined
with longer battery life. Kontrons COM Express® mini
concept with its memory and storage on board is
designed with the requirements of handheld devices for
medical, transportation and for rugged environments in
general as well as small mobile data systems in mind,
not to mention a host of new applications that prior
to now have not been possible due to size or power
consumption limitations.
Advantages
» Credit Card sized footprint (55 x 84 mm)
» COM Express® mini Pin-out Type 1 and
pin-out Type 10
» Serial ATA, for highspeed drives
» Memory and FlashDrive on board
Based on COM Express® pin-out Type 1, pin-out Type 10
guarantees maximum of continuity and being prepared for future
needs. In pin-out type 10, SATA ports 2 + 3 and PCI Express
lanes 4 + 5 are reserved pins for future usage.
As no Chipset which fits on COM Express® mini designs haven't
offer 4 SATA ports nor all 6 PCI Express lanes, this is a good
trade-off to be open for future need, USB 3.0 for example. In
distinction to type 1, the type 10 use the former LVDS B and
VGA to support the new DDI port. Digital Display Interface
(DDI) is basically a multiplex port and enables to provides SDVO,
DisplayPort, DVI or HDMI alternatively. Most important for
industrial usage are serial COM ports which where added to Type
10, as well.
Ready-to-run Starterkits
When you're ready to start evaluating the COM Express® mini platform, make sure to place your order for one of the ready-to-run
starter kits that comes complete with all needed accessories as well as a LCD display.
COMe Starterkit Ref. T10
COMe-mSP1
(nanoETXexpress-SP)
w/ Reference Carrier-i Type 10, 7" display, touch
controller, power supply and more
COMe-mTT10
(nanoETXexpress-TT)
COMe Ref. Carrier-i Type 10
This COM Express® Reference Carrier board is
specially designed for environmental tests with
extended temperature range (E2) -40°C to +85°C. It
also offers three different display interfaces for high
graphic scalability: LVDS, Display Port and DVI.
COMe-mCT10
CPU Intel® Atom Z510, Z530 Intel® Atom E6xx / E6xxT Intel® Atom N2600, N2800, D2550
CPU Clock 1.1 GHz up to 1.6 GHz 0.6 GHz up to 1.6 GHz Up to 2x 1.86 GHz
Cache 32 kB Instruction Cache + 24 kB L1/512
kByte L2
32 kB Instruction Cache +
24 kB L1 Cache, 512 kB L2 Cache
32 KB Instructions cache + 24 KB L1 Cache,
1MB L2 Cache
Chipset Intel® SCH US15W Intel® PCH EG20T Intel® SCH NM10 Express
Bus Speed 400/533 MHZ FSB n/a n/a
Memory Onboard up to 2 GB DDR2 Onboard up to 2 GB DDR2-800 Onboard up to 4 GB DDR3 (800/1066 MHz)
Hard Disk 1x onboard SSD up to
4 GByte, 1 SDIO port (shared with GPIO)
2x SerialATA 300, 1x microSD-Card Slot on
GPIO alternatively, 1x SATA 300, 1x SATA E2
SSD up to 8 GB
USB USB 2.0, 8 ports (1 USB Client) USB 2.0, 6 ports + USB Client port USB 2.0, 8 ports
PCI Express 1 PCIe x1 lane
(opt. 2 PCIe x1 if no onboard LAN)
2x Serial ATA external supporting 3Gb/s
alternatively: 1x SATA + 1x SATA onBoard SSD
Flash drive up to 8GB SLC / 32GB MLC
3x PCIe x1 lanes 4x PCI Express x1 Lanes,one for LAN onboard
Serial Ports – 2x 2-wire TTL 2x 2-wire TTL optional
Ethernet Intel® 82574L Hartwell, 10/100/1000 MBit MAC in Chipset integrated, Phy: Broadcom
BCM54610, 10/100/1000 MBit
Intel® 82574L (Hartwell)
10/100/1000 Mbit
Sound Intel® High Definition Audio Intel® High Definition Audio Intel® High Definition Audio w/ HDMI 1.3a
support
Graphics Controller Integrated Intel® Graphics HDTV/HD
capable, Decoder for MPEG2(HD)/H.264
Integrated 2D/3D Graphics Engine, Gfx Core
333/400 MHz, shared VRAM Video Encode:
MPEG4, H.263, H.264 Video Decode: MPEG2,
MPEG4, VC1, WMV9, H.264
Graphics Memory Up to 256 MB, DVMT Up to 352 MB, DVMT tbd
Display Interfaces Single Chanel LVDS 18/24 Bit 1366x768;
SDVO (optional) up to 1920x1080
LVDS 18/24bit 1280x768@60Hz
SDVO 1920x1080@50Hz
Integrated 2D/3D Graphics Engine, GMA
3650/3600, Gfx clock 640/400MHz, DirectX®
9.1 Video Decode: MPEG2, Blu-Ray Disk 2.0,
VC-1, H.264, WMV9 up to 1080p
LVDS 18/24bit (N2600/2800) 1366x768
LVDS 18/24bit (D2550) 1440x900 1x DP++
(HDMI/DVI/DisplayPort, embedded DP)
Power Support 4.75 V – 14.7 V; ACPI 3.0 4.75 V – 14.7 V; ACPI 3.0 4.75 V – 14 V, ACPI 3.0
Form Factor COM Express® mini:
84 x 55 mm
Pin-out Type 1
Temperature Operation: 0°C to 60°C
Storage: -30°C to 85°C
COM Express® mini:
84 x 55 mm
Pin-out Type 10
–40°C to +85°C
Operation: 0°C to +60°C
Storage: -30°C to +85°C
Industrial Temperature Range:
-40°C to +85°C
COM Express® mini:
84 x 55 mm
Pin-out Type 10
Operation: 0°C to +60°C,
Storage: -30° to +85°C,
Extended Temperature:
-25°C to +75°C on request
COMe Eval Carrier T10
COM Express® Eval Carrier Type 10 board is
designed to allow embedded application
developers to get up and running quickly on
the COM Express® mini platform.
64 www.kontron.com/com
Custom Products,
Software & Services
About Kontron Systems & Platforms
HMI
Computer-on-Modules Boards & Mezzanines