Solenoid Valves, Pneumatic Cylinders, Fittings, Air Treatment - fidemar

More documents

Recommendations

Info

Solenoid Valves, Pneumatic Cylinders, Fittings, Air Treatment Groups - METAL WORK The FRL units can be removed from the system without disturbing the pipes. This can be done with a single element or with the entire system. Assemble the unit so that the air flows in the direction marked by the arrows. MetalWork S.p.a. - via Segni, 5-7-9 25062 Concesio (Brescia) - Italy Tel +39 30 218711 Fax +39 30 2752106 E-mail: metalwork@metalwork.it http://www.metalwork.it/eng/skillair_intro.html (2 of 2) [8/3/2001 03:28:37 p.m.] World wide :
Solenoid Valves, Pneumatic Cylinders, Fittings, Air Treatment Groups - METAL WORK Skilltronic Skilltronic is an electronically-controlled pressure regulator equipped with an 8-bit microcontroller. The control signal can be analogic, digital via RS232 or digital from the keyboard. It is converted into a proportional pressure signal by means of solenoid valves. The regulator can be used alone within the indicated flow values, or in combination with a Skillair 300 or 400 pilot-operated pressure regulator (power stage). The advantages are: ● Integration with analogic or digital control systems (PC, PLC, etc.). ● Extremely fast response times. ● Excellent repeatability and reliability. ● Low power absorption. E n g l i s h I t a l i a n o you are in > products > frl > skillair > skilltronic Skilltronic is available in two versions base: Version A, with analogic control via voltage or RS232 serial line. Version D, with control via RS232 serial line or keyboard or voltage, with display of the set and regulated pressures. TECHNICAL DATA SKILLTRONIC A and D SKILLTRONIC 300 A and SKILLTRONIC 400 A and 300D 400 D Setting range MPa 0.03 - 0.7 bar 0.3 - 7 psi 4 - 100 Control pressure MPa 0.1 - 0.8 bar 1-8 psi 15 - 115 Temperature range °C –10÷+50 °F 14 - 122 Degree of protection IP 60 IP 65 IP 65 Weight Kg 0.4 1.9 5.6 Fluid 20 µm filtered air, de-humidified and unlubricated. Supply voltage 24 V DC Max. absorbed power W 2 Control 0-5V / 0-10V / RS 232 Flow rate at 6 bar 0.5 bar P Nl/min 60 4500 18000 Reaction time ms < 5 – – Response time - rise time* ms 60 – – Response time - fall time** ms 100 – – * Volume 30 cm3 Pal= 8bar, from 2 to 4 bar ** Volume 30 cm3 Pal= 8bar, from 4 to 2 bar MetalWork S.p.a. - via Segni, 5-7-9 25062 Concesio (Brescia) - Italy Tel +39 30 218711 Fax +39 30 2752106 E-mail: metalwork@metalwork.it http://www.metalwork.it/eng/skillair_skilltronic.html [8/3/2001 03:28:41 p.m.] • HOME • NEWS & EVENTS • COMPANY • CLUB • SALES NETWORK • PRODUCTS FRL New Deal Skillair Introduction Skilltronic Circuit shut-off valves Progressive starter Bit Fittings Valves Cylinder Handling • NEW PRODUCTS • ADVERTISEMENT • INTRODUCTION • CONTACT US World wide :
Page 1 and 2:
Solenoid Valves, Pneumatic Cylinder
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32: Solenoid Valves, Pneumatic Cylinder
Page 33 and 34: http://www.metalwork.it/eng/img/eng
Page 35 and 36: http://www.metalwork.it/eng/img/eng
Page 37 and 38: http://www.metalwork.it/eng/img/omi
Page 81: Solenoid Valves, Pneumatic Cylinder
show all

Solenoid Valves, Pneumatic Cylinders, Fittings, Air Treatment - fidemar

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?