INLET BARRIER FILTER SYSTEM - Donaldson Company, Inc.
INLET BARRIER FILTER SYSTEM - Donaldson Company, Inc.
INLET BARRIER FILTER SYSTEM - Donaldson Company, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aerospace Filtration Systems, <strong>Inc</strong>.<br />
AFS-BH206B-IBF-KIT-ICA, Revision Initial Release Proprietary Information<br />
7-5. <strong>SYSTEM</strong>S AND ELECTRICAL SERVICING<br />
There are no system and electrical components requiring periodic servicing. See Chapter 6 for<br />
inspection requirements and Chapter 8 for maintenance requirements.<br />
NOTE<br />
The Filter Maintenance Aid is designed to hold the highest differential<br />
pressure across the filter assembly reached during the last flight, and should<br />
be reset after servicing of the filter assembly by depressing the yellow button<br />
marked “PUSH TO RESET” located on the end of the filter maintenance aid<br />
(See Pictures 8-3 & 8-4).<br />
7-6. ENGINE WATER WASH<br />
NOTE<br />
It is not necessary to remove the IBF filter prior to conducting an engine<br />
wash.<br />
It is recommended the engine water wash frequency be in accordance with the current Rolls-Royce<br />
requirements for operation in a standard environment, desert environment or salt-water environment.<br />
7-7. AIRCRAFT WASHING<br />
During aircraft washing the IBF system, including the filter assembly, should be protected or<br />
removed to avoid damaging the filter media with high pressure spray nozzles or to prevent solvents<br />
from rinsing away the oil in the filter media.<br />
Use or disclosure of this material is subject 7-7 AFS Bell 206B IBF Instructions for Continued Airworthiness<br />
to the restrictions on the title page
Change language