MUST - IBM
MUST - IBM
MUST - IBM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>IBM</strong> Training - 2008 Systems Technical Conference<br />
Initial Configuration (continued)<br />
� NIM install completes. One command included in the NIM script<br />
resource, running at the end of install, and before boot<br />
chdev -l hdisk0 -a hcheck_interval=300 –P<br />
� Sets MPIO to test failed and non-active paths every 5 minutes, bring<br />
them online if available.<br />
� The newly Installed and booted LPAR has two vscsi client adapters<br />
# lsdev -Cc adapter -F "name physloc" | grep vscsi<br />
vscsi0 U9117.MMA.1023C9F-V9-C8-T1<br />
vscsi1 U9117.MMA.1023C9F-V9-C9-T1<br />
� Two MPIO paths to hdisk0<br />
# lspath -l hdisk0<br />
Enabled hdisk0 vscsi0<br />
Enabled hdisk0 vscsi1<br />
� The PVID we expected does come thru from VIO to the Client LPAR<br />
# lspv<br />
hdisk0 00c23c9f291cc438 rootvg active<br />
� The table is now set for Live Partition Mobility<br />
30 20-Aug-08<br />
© 2008 <strong>IBM</strong> Corporation
Change language