CnMBook User Manual - KMS Components

d). Now, you can select a network to be connected from the interface shown in Figure 3. When the
selected
network is an encrypted network, the interface shown in Figure 7 will pop up to request you to
enter
the network key to connect to the network.
connection starts. When the connection succeeds, the system prompts
the networks is connected and
the
IP address is being obtained. When the IP address is obtained, the system prompts the network is
connected
and the IP address is , as shown in Figure 8.
disconnect the current network connection.
Figure 7
e). On the interface shown in Figure7, enter the key and click OK to connect the network, then the
* . * . * . * .
Disconnect the currently connected network.
Currently connected network
and obtained IP address.
Figure 8
On the interface shown in Figure8, select the connected network, and then click Disconnect to rapidly
60