Service Manual - Dana Corporation

Axle and Carrier Assembly Model Identification
Drive Axle
Gear i n g
D - Forward Tan dem Axle
R - Rear Tan dem Axle
S - S ingle Redu ction
D - Single Redu ction with Wheel
Differential Lock
T - Du al Ran ge
P - Plan etary Dou ble Redu ction
Example:
D S = Forward Tandem Axle/S ingle Reduction
R S = Rear Tan dem Axle/S ingle Reduction
Note: Tags that do not include all the information shown here
are older models (before May 1987).
Spicer ®
MODEL PART NO. RATIO
MADE IN:
CUST. PART NO.
SPEC. SERIAL NO.
2
1
3
4
CUST. PART NO.
SPEC. SERIAL NO.
MODEL PART NO. RATIO
MADE IN:
Data plate is located on
the axle centerline
Forward Axle (Side View) Rear Axle (Top View)
General Information
1 - Country or origin
2 - Axle model identification
3 - Specification number assigned to the axle built by Spicer. Identifies all component parts of the axle including special OEM
requirements such as yokes or flanges.
4 - OEM part number assigned to the axle build
5 - Carrier assembly serial number assigned by the manufacturing plant
6 - Axle gear ratio
7 - Carrier assembly production or service part number
Spicer ®
5
L u be Pu mp
P = S tandard
(P) = Optional
6
7
Design Level
Capacity (x 1000 lbs.)
Example: 46 = 46,000 lbs.
Spicer ®
CUST. PART NO.
SPEC. SERIAL NO.
MODEL PART NO. RATIO
MADE IN:
2
Service Procedure