Air-Cooled Screw Liquid Chillers with Variable Speed ... - Aireyork
Air-Cooled Screw Liquid Chillers with Variable Speed ... - Aireyork
Air-Cooled Screw Liquid Chillers with Variable Speed ... - Aireyork
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dimensions - SI - continued<br />
YCIV1220E/V and YCIV1340S/P<br />
Notes:<br />
1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance,<br />
reliable operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable<br />
air patters and possible diminished performance. Johnson Controls’ unit controls will optimize the operation <strong>with</strong>out nuisance<br />
high pressure safety cutouts; however, the system designer MUST consider potential performance degradation.<br />
Access to the unit control center stipulates the unit is no higher than on spring isolators. Recommended minimum clearances: side to wall<br />
- 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions whatsoever; distance between adjacent units - 10’. No more<br />
than one adjacent wall may be higher than the unit.<br />
100<br />
102<br />
38<br />
POWER ENTRY<br />
254 WIDE X 330 HIGH<br />
VIEW B-B<br />
POWER ENTRY IS ON BOTTOM OF PANEL<br />
C<br />
C<br />
CONTROL ENTRY<br />
76 WIDE X 343 HIGH<br />
2238<br />
44<br />
VIEW A-A<br />
VIEW C-C<br />
B B<br />
305<br />
JOHNSON CONTROLS