AquaSpense Brochure - Whip Mix

AquaSpense
AquaSpense is designed primarily for
model production, rapidly dispensing a
single liquid (distilled water) by weighing
the bowl with the powder on a calibrated
scale. By dispensing the exact amount
of liquid for each pre-programmed
powder, remakes are virtually eliminated.
Inconsistencies and inaccuracies due to
human error in water/powder ratios are
removed from the modeling process. You’ll
achieve predictable working times, set
times, hardness and expansion. Accurate
models are produced every time.
TECHNICAL SPECIFICATIONS
Power Supply 100–240 VAC, 50/60 Hz, 1A
Shipping Weight 20.5 lbs.
Dimensions 11 3 ⁄ 4 " W x 13 1 / 8 " D x 23 1 / 4 " H
Display Characters 4 lines x 20 characters
Operational Altitude Sea level – 6,560 feet
Operation Temperature 55° F – 105° F
Warranty 3 years parts and labor
(US and Canada only)
AquaSpense SL
AquaSpense SL is used primarily in
the investment area. The key difference in
the two units is that the SL is capable of
accurately dispensing two different liquids.
On one side of the unit, two pumps quickly
dispense water. The other side uses a
pinch valve for dispensing Special Liquid
for investments. The results are consistent
casting sizes with less finishing time.
The SL unit is extremely versatile and can be
used in smaller labs as a combination unit
that dispenses liquids for models as well as
investments. The SL can also be used in the
model department, when using a Gypsum
Hardener or other enhancing liquid.
TECHNICAL SPECIFICATIONS
Power Supply 110–120 VAC, 50/60 Hz, 1A
200–240 VAC, 50/60 Hz, .5A
Shipping Weight 20.5 lbs.
Dimensions 11 3 ⁄ 4 " W x 13 1 / 8 " D x 23 1 / 4 " H
Display Characters 4 lines x 20 characters
Operational Altitude Sea level – 6,560 feet
Operation Temperature 55° F – 105° F
Warranty 3 years parts and labor
(US and Canada only)
Improve accuracy
and maintain quality.
Eliminate remakes.
Human error in weighing and dispensing is inevitable,
and even the most skilled technician can be fooled by
inconsistencies in the pre-weighed powders. Through
accurate weighing and dispensing technology,
AquaSpense and AquaSpense SL eliminate those
unfortunate and unforeseen variables. Technicians
can select programs for up to 15 various gypsums
or investments that will produce the desired
water/powder ratio through exact dispensing.
In a competitive environment, you can’t afford to waste
time or send your customers a finished product that misses
the mark. Too many inaccurate models or mistakes can
cause irreparable harm to your company’s good name.
Both AquaSpense
Liquid Dispensers:
Accurately weigh gypsum or investment powder
and dispense the precise amount of water and/or
Special Liquid required.
Eliminate human error factor with no hand
measuring required.
Maintain accurate liquid/powder ratios.
Provide predictable end results for both models
and castings.
Offer program memory settings for up to 15
gypsums or investments.