sliding door systems: assembly / installation instructions ... - Raumplus

More documents

Recommendations

Info

10_11 INSTALLATION PREPARE / MOUNT TOP TRACK 1_ cut top track to final dimmensions and drill holes 8 drill hole 100 mm [3 15/16“] [39 3/8“] approx. every 1000 mm 100 mm [3 15/16“] wall Wand Choose appropriate fastners 2_ drill holes and mount top track (fig.: without ceiling) �5 USA 1 866 580 0112 raumplusna.com CAN 1 866 999 3949
INSTALLATION SHORTEN BOTTOM TRACK / MARK POSITION Do not affix bottom track on the floor Bottom tracks are typically delivered with 50mm [2“] and have to be shortened on site accordingly. 3_ cut bottom track to final dimmension and position it nearly under top track. insert the sliding door, push up bottom rollers! top track double 4_ Insert sliding door, align perpendicular by moving bottom track, mark position with masking tape If using an insert track or tile channel, the psoition is to be located by a plumb line. water level bottom track double USA 1 866 580 0112 raumplusna.com CAN 1 866 999 3949 9
Page 1 and 2: SLIDING DOOR SYSTEMS: ASSEMBLY / IN
Page 3 and 4: GENERAL INFORMATION / TOOLS GENERAL
Page 5 and 6: DETAIL DRAWING OBJECT QUANITY DESCR
Page 7: ASSEMBLY ASSEMBLE DOOR 5mm 5mm 3_ a
Page 11 and 12: INSTALLATION ADJUST DOOR / APPLY BR
Page 13: ASSEMBLY 45/ 90 DEGREE CORNER PROFI

sliding door systems: assembly / installation instructions ... - Raumplus

Create successful ePaper yourself

Delete template?

Save as template?