Three-phase Synchronous motors - Baumüller Reparaturwerk

Three-phase synchronous motors DS 45 - 100..540V
General technical data
Three-phase synchronous motors DS 45-100..540V
Version: IM B5 Horizontal mounting
IM V1 Vertical mounting, shaft end to the bottom
IM V3 Vertical mounting, shaft end to the top
Type of protection: IP65 Surface-cooled, without fan, DIN 40050, DIN 40053
IP54 Surface-cooled, with fan
Shaft gland: IP64 Standard
Connection:
IP65 with shaft sealing ring (option)
Main connection U V W Terminal box
Connector (option)
Frame size 45 with connector as standard
Control connection 12-pin connector
Brake in the main connection
Thermal sensor in control connection (for resolver only)
Cooling method: IC 0041 completely enclosed machine surface-cooled no fan
IC 0641 as above, but with fan (air flow direction from B to A end)
Thermal sensor: Linear thermal sensor for evaluation in the controller
Temperature rise: ∆ϑ = 105K Insulation class F acc. to EN 60034
Temperature range: 0....+ 40°C
Storage: -30°C...+85°C
Paint: black matt RAL 9005
Lager: ≥ 20,000h Service life
Balance quality: N According to DIN ISO 2373
R, S On request
Vibration-resistant up
to:
radial 3g 20 Hz to 2 kHz acc. to EN 60068-2-6
axial 0.5g 20 Hz to kHz acc to EN 60068-2-6
Higher vibration resistance on request
Flange: acc. to IEC standard Dimension b1: Tolerance j6
Shaft end: cylindrical According to DIN 748 with shaft key DIN 6885;
also available without keyway)
Dimension d: Tolerance k6
Centering with internal thread acc. to DIN 332 form D
Holding brake: Option
Actual speed encoder: 2-pin resolver
Sincos encoder (option) Other encoders on request
Three-phase synchronous motors 45 - 100 02/05 Technical alterations reserved
Baumüller Nürnberg GmbH 29