RMA ERMA - ERMA - Electronic GmbH
RMA ERMA - ERMA - Electronic GmbH
RMA ERMA - ERMA - Electronic GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9.8. Main reset<br />
The main reset is performed by pressing a key combination at the front of the panel<br />
meter. By doing this all parameters are setting to the default value. The value of the<br />
parameter 0-00 (input range) is not changing by the main reset.<br />
During the main reset the display shows “Init.”.<br />
Perform the main reset by<br />
Pressing the pushbuttons P , and at the same time during 10 seconds.<br />
10. Error codes<br />
10. Error codes<br />
10.1. Encoder not connected “Err01"<br />
The display flashs and indicate “Err01"<br />
Signalizes that no encoder have been connected to the instrument<br />
10.2. Waiting for data input “Err02"<br />
The display flashs and indicate “Err02"<br />
Signalizes in slave-mode, that after the connection of an encoder no data input<br />
have been received by the instrument.<br />
10.3. External clock frequency too high “Err03"<br />
The display flashs and indicate “Err03"<br />
Signalizes in slave mode, that the clock frequency of the “external clock” is too<br />
high (> 125 kHz).<br />
E<strong>RMA</strong>-<strong>Electronic</strong> <strong>GmbH</strong> 38