Download as PDF - Touratech Nordic
Download as PDF - Touratech Nordic
Download as PDF - Touratech Nordic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Extra-capacity tank<br />
for the BMW R 80 / 100 GS<br />
- 43 litre tank<br />
- Very comfortable riding<br />
- Low centre of gravity, bike is e<strong>as</strong>y to handle even if<br />
fuel tank is full<br />
- Pl<strong>as</strong>tic, can be lacquered over (nylon)<br />
- Can also be fitted to R 80 GS (no modifications<br />
required)<br />
- When mounted on the R 100 GS, the seat needs to<br />
be modified slightly.<br />
- Fairing of GS models needs to be modified.<br />
100-0020<br />
Ceramic clutch, BMW R 80 / 100 GS<br />
For the BMW R 80 / 100 GS and boxer engines type<br />
R247E until '81<br />
- 1.8 mm l<strong>as</strong>er- cut stainless steel<br />
- 8 ceramic friction plates (riveted)<br />
- Racing technology<br />
- Tried and tested in South Africa for many years and<br />
on tracks world-wide<br />
- Clutch does not longer overheat under extreme<br />
conditions<br />
- Excellent workmanship and exacting tolerance<br />
- It normally does not break during the<br />
“LIFE OF A MOTORBIKE”<br />
040-0352<br />
Hand protectors<br />
for the R 100 GS with original heated grips<br />
- Optimum lever protection brake and clutch levers<br />
- Robust even at high speeds<br />
- Good wind deflection with spoiler<br />
- Elegant design enhances the enduro looks<br />
- Fit the original BMW heated grips (wires inside<br />
handlebars)<br />
- Special adapter for R 100 GS available<br />
- Many colours available<br />
Hand guard colours: black (0), white (1), red (2),<br />
yellow (3), blue (4), green (5), orange (7)<br />
When ordering, ple<strong>as</strong>e substitute the X on the end of<br />
the order number for the number in brackets.<br />
Special parts<br />
R 100 GS<br />
040-054X (protectors)<br />
040-0570 (Spoiler, black)<br />
040-0538 (Adapter kit for model before year 1991)<br />
An adapter kit is required for fitting the hand protectors to the R80/100GS before model year 1991 and G/S.<br />
103