Download as PDF - Touratech Nordic

182 Special parts
Technical Equipment
Blade Fuse Tester and Extractor
The Tester/puller conveniently and easily tests standard size ATO and MINI Blade
fuses either in or out of the fuse block. Indicator light on tester glows bright green
when fuse is good. Fuse puller end allows for easy fuse removal and replacement.
For use with standard size ATO and MINI Blade Fuses. Timesaving, as the fuses
do not have to be removed from the fuse block to be tested. Maximum rating: 24V
070-1140
Fritec-Leading Battery
Developed in collaboration with leading battery
manufacturers the fritec compact professional charging
device is the intelligent solution for all 6 and 12 volt
lead, lead gel, pure lead, tin and maintenance free
batteries with capacities of 2.5 - 88 Ah.Thanks to ist
microprocessor controlled charging characteristic IUoU
with desulphation mode it guarantees sparing charging
with optimised charging current. Short circuit resistant
and polarity protected featuring extensive protective
functions e.g. automatic disruption of the charging
procedure in the event of a cell short circuit or cell failure
it provides fully automatic charging and charge
preserving procedures for months. LEDs display the
amount of charge a battery has. The driving simulation
performed by the preset charge pause cycles keeps the
battery in good condition even when it is not being used
by the vehicle. We only had to attach the plug for the
onboard socket to this brilliant charging unit.
130-0012
AccuMate automatic charger,
6/12V selection
TecMate technology recommended by 8 major
motorcycle manufacturers. Can be used on any 6/12V
lead-acid battery type, including MF-AGM & GEL. Fully
automatic, multi-stage charging programme 100% safe
for long term battery maintenance, support of
connected accessories.
130-0010