SAW / STW Oscillators - TriQuint

More documents

Recommendations

Info

Custom Oscillators TriQuint oscillators are available in a variety of hermetic custom packages, incorporating custom features such as high ripple rejection/low noise voltage regulators and SMA or GPO connectors. Please contact the factory to discuss your custom requirements. TriQuint standard military oscillators are available in high performance versions (up to around 1500 MHz), with phase noise approximately 10 dB better than the standard version at all offsets. For even higher performance, we can use higher Q resonators, which result in even better close in phase noise and a noise floor intercept at a much lower offset frequency. These types of parts have to be ovenized, or used over a greatly reduced temperature range. Hi Performance HiQ Resonator Connecting the Digital World to the Global Network ® | www.triquint.com | © 9-12 TriQuint Semiconductor, Inc. | p.8
Custom Oscillator Capability TriQuint Semiconductor offers a wide standard line of oscillator products as described on the preceding pages, but we also understand that not all applications can be met by an off-the-shelf approach. Custom design is TriQuint’s greatest strength. Our capabilities range from creating custom hermetic oscillator packages with SMA or GPO connectors to developing non-hermetic aluminum housings that employ bolted connectors. Customization options also include oversized parts that deliver enhanced frequency stability over temperature and oscillators with built-in test capabilities and dual or frequency-multiplied outputs. TriQuint specializes in meeting the stringent requirements of the most extreme operational conditions through custom designs. Please use the following table as a guide in understanding the range of solutions TriQuint offers, then contact a representative to arrange an engineering technical conference to explore custom solutions tailored to your individual oscillator needs. Parameters Fundamental Center Frequency (Doubled and Multiple Outputs Available) Temperature Ranges (Custom Available) Range 1 Range 2 Range 3 Range 4 Frequency Versus Temperature Range 1 Range 2 Range 3 Range 4 Set Tolerance* at 25°C Output Power Output Power Stability Range 1 Range 2 Range 3 Range 4 Frequency Versus Load Pulling Hybrid Voltage Controlled SAW / STW Oscillator High-Performance SAW / STW Oscillator Hybrid Fixed Frequency SAW / STW Oscillator 200 to 2000 MHz 100 to 1000 MHz 300 to 1800 MHz 0° to +70°C -40° to +85°C -55° to +95°C -55° to +125°C < 80 ppm ≤ 210 ppm ≤ 285 ppm < 285 ppm Externally Correctable to < +1 ppm 0 to +12 dBm (Custom: Up to +23 dBm) 1.0 dB 2.0 dB 2.5 dB 3.0 dB ≤ ± 15 ppm VSWR ≤ 1.5:1 0° to +70°C 0° to +70°C -40° to +85°C -55° to +95°C -55° to +125°C < 80 ppm < 80 ppm < 210 ppm < 285 ppm < 285 ppm * Custom Correctable to < +1 ppm 0 to +23 dBm (Custom: Up to +30 dBm) 1.0 dB 2.0 dB ≤ ± ppm VSWR ≤ 1.5:1 ± 50 ppm -10 to +2 dBm (Custom: Up to +25 dBm) Connecting the Digital World to the Global Network ® | www.triquint.com | © 9-12 TriQuint Semiconductor, Inc. | p.9 1.0 dB 2.0 dB 2.5 dB 3.0 dB ≤ ± 15 ppm VSWR ≤ 1.5:1 Harmonic Attenuation < -20 to -50 dBc < -30 to -50 dBc < -30 to -50 dBc Sub-Harmonic (Doubled Units Only) < -20 dBc < -30 dBc < -20 dBc Spurious Attenuation < -60 dBc < -85 dBc < -60 dBc Power Consumption Phase Noise Performance at 10 Hz at 100 Hz at 1 kHz at 10 kHz at 100 kHz > 1 MHz +12 VDC, +15 DVC at 40 to 85 mA Max. -35 to -60 dBc/Hz -65 to -90 dBc/Hz -95 to -120 dBc/Hz -115 to -140 dBc/Hz -135 to -160 dBc/Hz -155 to -170 dBc/Hz +15 VDC, +25 DVC at 500 mA Max. -65 to -75 dBc/Hz -95 to -107 dBc/Hz -125 to -137 dBc/Hz -155 to -165 dBc/Hz -160 to -175 dBc/Hz -168 to -180 dBc/Hz Response Slope Positive < 4:1 Turning Voltage (Typical) +2 to +12 VDC +8 VDC, +12 VDC, +15 DVC at 30 mA Max. -30 to -60 dBc/Hz -60 to -90 dBc/Hz -90 to -120 dBc/Hz -110 to -140 dBc/Hz -130 to -160 dBc/Hz -155 to -165 dBc/Hz Frequency Shift (Typical) Sufficient to maintain center for all operating conditions with voltage control option. Linearity (Typical) ±35% ±25% ±35% This table is intended as a reference of general capabilities. Contact TriQuint about your custom application and to discuss available packaging.
Page 1 and 2: ©9-12 TriQuint Semiconductor, Inc.
Page 3 and 4: The Enabling Technology of TriQuint
Page 5 and 6: Standard Military FFO Specification
Page 7: Standard Military VCO Specification
Page 11 and 12: How to Specify Oscillators Phase No

SAW / STW Oscillators - TriQuint

Create successful ePaper yourself

Delete template?

Save as template?