SAW / STW Oscillators - TriQuint

Custom Oscillator Capability
TriQuint Semiconductor offers a wide standard line of oscillator products as described on the preceding pages, but we also understand
that not all applications can be met by an off-the-shelf approach. Custom design is TriQuint’s greatest strength. Our capabilities range
from creating custom hermetic oscillator packages with SMA or GPO connectors to developing non-hermetic aluminum housings
that employ bolted connectors. Customization options also include oversized parts that deliver enhanced frequency stability over
temperature and oscillators with built-in test capabilities and dual or frequency-multiplied outputs. TriQuint specializes in meeting the
stringent requirements of the most extreme operational conditions through custom designs. Please use the following table as a guide
in understanding the range of solutions TriQuint offers, then contact a representative to arrange an engineering technical conference
to explore custom solutions tailored to your individual oscillator needs.
Parameters
Fundamental Center Frequency
(Doubled and Multiple Outputs Available)
Temperature Ranges (Custom Available)
Range 1
Range 2
Range 3
Range 4
Frequency Versus Temperature
Range 1
Range 2
Range 3
Range 4
Set Tolerance* at 25°C
Output Power
Output Power Stability
Range 1
Range 2
Range 3
Range 4
Frequency Versus Load Pulling
Hybrid Voltage
Controlled SAW /
STW Oscillator
High-Performance
SAW / STW
Oscillator
Hybrid Fixed
Frequency SAW /
STW Oscillator
200 to 2000 MHz 100 to 1000 MHz 300 to 1800 MHz
0° to +70°C
-40° to +85°C
-55° to +95°C
-55° to +125°C
< 80 ppm
≤ 210 ppm
≤ 285 ppm
< 285 ppm
Externally Correctable
to < +1 ppm
0 to +12 dBm
(Custom: Up to +23 dBm)
1.0 dB
2.0 dB
2.5 dB
3.0 dB
≤ ± 15 ppm
VSWR ≤ 1.5:1
0° to +70°C 0° to +70°C
-40° to +85°C
-55° to +95°C
-55° to +125°C
< 80 ppm < 80 ppm
< 210 ppm
< 285 ppm
< 285 ppm
* Custom Correctable
to < +1 ppm
0 to +23 dBm
(Custom: Up to +30 dBm)
1.0 dB
2.0 dB
≤ ± ppm
VSWR ≤ 1.5:1
± 50 ppm
-10 to +2 dBm
(Custom: Up to +25 dBm)
Connecting the Digital World to the Global Network ®
| www.triquint.com | © 9-12 TriQuint Semiconductor, Inc. | p.9
1.0 dB
2.0 dB
2.5 dB
3.0 dB
≤ ± 15 ppm
VSWR ≤ 1.5:1
Harmonic Attenuation < -20 to -50 dBc < -30 to -50 dBc < -30 to -50 dBc
Sub-Harmonic (Doubled Units Only) < -20 dBc < -30 dBc < -20 dBc
Spurious Attenuation < -60 dBc < -85 dBc < -60 dBc
Power Consumption
Phase Noise Performance
at 10 Hz
at 100 Hz
at 1 kHz
at 10 kHz
at 100 kHz
> 1 MHz
+12 VDC, +15 DVC
at 40 to 85 mA Max.
-35 to -60 dBc/Hz
-65 to -90 dBc/Hz
-95 to -120 dBc/Hz
-115 to -140 dBc/Hz
-135 to -160 dBc/Hz
-155 to -170 dBc/Hz
+15 VDC, +25 DVC
at 500 mA Max.
-65 to -75 dBc/Hz
-95 to -107 dBc/Hz
-125 to -137 dBc/Hz
-155 to -165 dBc/Hz
-160 to -175 dBc/Hz
-168 to -180 dBc/Hz
Response Slope Positive < 4:1
Turning Voltage (Typical) +2 to +12 VDC
+8 VDC, +12 VDC, +15 DVC
at 30 mA Max.
-30 to -60 dBc/Hz
-60 to -90 dBc/Hz
-90 to -120 dBc/Hz
-110 to -140 dBc/Hz
-130 to -160 dBc/Hz
-155 to -165 dBc/Hz
Frequency Shift (Typical) Sufficient to maintain center for all operating conditions with voltage control option.
Linearity (Typical) ±35% ±25% ±35%
This table is intended as a reference of general capabilities. Contact TriQuint about your custom application and to discuss available packaging.