View Document Here - Hanford Site

REV
ESHQ Document
Page
TFC-ESHQ-Q_C-C-03, REV C-2
31 of 53
CONTROL OF SUSPECT/
COUNTERFEIT ITEMS
Effective Date October 5, 2005
ATTACHMENT B - CLASSIFICATION OF POTENTIALLY SUSPECT/COUNTERFEIT
ITEMS (cont.)
• Sheet
• Plate
Bars
• Round stock
• Other raw material which requires an ASTM or national standard
• All lifting/rigging gear (wire rope shall be made in the United States by a member of
the Wire Rope Technical Board (WRTB) or the Associated Wire Rope Fabricators
(AWRF) (except stainless steel, and unless recommended otherwise by a crane or hoist
manufacturer); stainless steel wire rope shall be made in the United States and shall be
302 or 304 grade stainless steel unless otherwise recommended by a crane or hoist
manufacturer)
• Ratchet tie-downs/strapping devices and come-a-longs, with fasteners.
The following materials are excluded unless required by the applicable program/project:
ASTM-A36, brass, copper, sheet metal 7 GA or less, and aluminum.
C. PIPING - which requires an ASTM or ASME standard
• Fittings
• Flanges
• Valves
• Pipe
• Components.
The following materials are excluded unless required by the applicable program/project:
ASTM-A-53, Swagelock; cast iron, galvanized, copper, bronze, and brass; PVC; and gaskets.
D. FASTENERS - All fasteners 1/4" and above in diameter
• Bolts
• Studs
• Cap screws
• High-strength washers
Nuts
• Anchors.
NOTE: Attachment I identifies headmarkings for stainless steel and carbon steel high strength
fasteners that are considered counterfeit. Fasteners exhibiting these headmarks are counterfeit
and no further testing is required.
The following items are excluded, unless required by the applicable program/project: sheetmetal
screws, wood screws, stove bolts, pan heads, machine screws, lag bolts, threaded rod, rivets, and
carriage bolts-
G5-566