Industrial Fluorescent - Dickman Supply

29
VT2/VT3 VAPORTITE INDUSTRIAL
Fiberglass housing is reinforced polyester and self-extinguishing
(ASTM-D635-74) plastic of a permanent pearl gray color.
Polyurethane gasketing is formed in
the housing providing a continuous
seamless seal for the diffuser.
High impact lens options to withstand
the most demanding environments
UL Listed for wet locations
(standard).UL/cUL Listed.
Optional die formed or 95% Specular
Miro finished reflector.
Ordering Information Sample Number: 8TVT2-254DR-UNV-EB82-M4-U
Width
Blank=4' Length
8T=8' Length
Series
VT2=Vaportite
VT3=Vaportite (Gasketed
Enclosure)
Number of Lamps (3)
1=1 lamp (T5 or T8)
2=2 lamps (T5 or T8)
3=3 lamps (T8 only)
(Lamps not included)
Lamp Type
28=28W T5 Lamp (4' Long)
32=32W T8 Lamp (4' Long)
54T5=54W T5HO Lamp (4' Long)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
480V=480 Volt
UNV=Universal
Voltage 120/277V
UNC=Universal
Voltage 347/480V
Options
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed
(see table on pg 36)
Lens
DR=Internal Prismatic Lens/15% DR High Impact Additive (Standard)
DR-50=50% High Impact Additive
DR-100%=100% High Impact Additive (Extreme)
LEX=High Impact Clear Polycarbonate LEXAN Lens/Low Brightness Pattern
NOTES: (1) Ballast type used only if ballast & voltage is chosen (2) Not available when specifying emergency
ballasts, voltage must be specific (3) T5HO is only available in 1 or 2-lamp versions only (4) Emergency
option in 3 lamp version must use remote mount test switch (5) Top Hub required when stem mounting
(6) VT2 only
(3) (4)
No holes required for surface/chain
mounting from supplied mounting
bracket.
A watertite hub for 1/2" conduit entry is
provided at each end of housing (standard)
for continuous feed.
Sturdy cam latches clamp diffuser tightly for a positive seal
between housing, gasketing and diffuser.
Unit has full metal liner (channel) secured by brass internal/external mounting
studs for positive grounding, maximum protection and rigidity.
Ballast Type (1)
T8 Systems
EB8 =T8 Electronic Instant Start (4)
Total Harmonic Distortion < 10%
EB8 /PLUS= T8 Electronic Instant Start (4)
WL=Wet
Location
Label
No of Ballast
1 or 2
No of
Ballast
1 or 2
VT3’s EN-SEAL TM
New Architectural Form VT3
gasketing offers IP65
resistance to water absorption.
High Ballast Factor >1 15
Total Harmonic Distortion < 10%
ER8 =T8 Electronic Program Rapid Start (4)
Total Harmonic Distortion < 10%
ER8 /PLUS= T8 Electronic Program Start (4)
No of Ballast
1 or 2
High Ballast Factor >1 15
No of
Total Harmonic Distortion < 10%
Ballast
1 or 2
EB8 /L= T8 Electronic Instant Start
Low Ballast Factor > 0 80
No of Total Harmonic Distortion < 40%
Ballast
1 or 2
T5 Systems
EBT =T5 Electronic Program Start
No of Ballast
1 or 2
EHT =T5HO Linear Electronic Program Rapid Start
High Ambient Total Harmonic Distortion < 10%
No of Ballast
1 or 2
Options
RIF1=Radio
Interference Suppressor
TH=(2) Top Watertite Hubs (5)
TEH=(2) Top & (2) End Watertite
Hubs (all Watertite Hubs have 1/2"
Conduit Entry) (5)
DD=Deep Diffuser (4' Length) (6)
Packaging
U=Unit Pack
PALC=Job Pack
in Carton
(Available for 4' Fixture
Length) To Complement
Deep Diffuser Depth of 5-7/8"
[150mm]
8' Fixture
M4=Specular Reflector
SSL=Stainless Steel Latches
Accessories (order separately)
VT2-Chain/Set-U=Chain Hanging Set
Includes 6 ft of chain, 4 large
S-Hooks and 4 small S-Hooks
Order Two (2) Kits for each
4' or 8' Fixture
VT2-SS-MBK=Stainless
Steel Mounting Bracket
VT2 Stem Bushing=1/2"
3/8" (Required when using
Stem Sets Requires (1) per
Stem Set )