PERfoRMaNcE ENERGIzEd BY - LANXESS
PERfoRMaNcE ENERGIzEd BY - LANXESS
PERfoRMaNcE ENERGIzEd BY - LANXESS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BoNdING aGENTS<br />
Product chemical composition application<br />
Bonding Agent 2001 N* Aromatic polyisocyanurate in DBP,<br />
viscous liquid<br />
Bonding Agent 2005 Aromatic polyisocyanurate in butyl acetate,<br />
almost colourless, low viscous liquid<br />
Bonding Agent TP<br />
LXS 51030<br />
Bonding Agent TP<br />
LXS 51066<br />
Bonding Agent TP<br />
LXS 51099<br />
*Bonding agent 2001 N only in non EU countries available.<br />
BlowING aGENTS<br />
Aromatic polyisocyanurate in DINP,<br />
viscous liquid<br />
Aromatic polyisocyanurate in Mesamoll ® II,<br />
yellow, viscous liquid<br />
Aromatic polyisocyanurate in Isononylbenzoate,<br />
Yellow, viscous liquid<br />
Reactive bonding agents which improve the<br />
adhesion of PVC plastisol coatings to substrates<br />
made of polyester or polyamide fibres. The<br />
choice of the bonding agent system depends<br />
above all on the demands made on the finished<br />
product, the conditions in which the base coat<br />
plastisol is formulated, the type of the coating<br />
equipment used and the residence time in the<br />
gelling tunnel. Typical fields of application include<br />
tarpaulins for lorries, awnings, air inflated structures<br />
and other textile constructions.<br />
Product chemical composition application<br />
Genitron ® Plastisol Activated azodicarbonamide preparations,<br />
yellow powders<br />
Genitron ® EP<br />
Extrusion<br />
Genitron ®<br />
Endothermic<br />
Genitron ®<br />
Masterbatches<br />
Azodicarbonamide preparations,<br />
yellow powders<br />
Sodium bicarbonate preparations,<br />
white powders<br />
Masterbatches of chemical blowing agents,<br />
white/yellow pellets<br />
Activated ADCpreparations for the lowtemperature<br />
or highspeed expansion of PVC plastisols.<br />
Range of quality blowing agent formulations<br />
specially developed for the injection moulding<br />
and extrusion of foamed thermoplastics.<br />
Endothermic preparations for the injection<br />
moulding and extrusion of thermoplastics.<br />
Polymer bound blowing agent concentrate for<br />
the foaming of thermoplastics and rubbers.