PERfoRMaNcE ENERGIzEd BY - LANXESS

PlaSTIcIzERS
Product chemical composition application
Uniplex 214 n­Butylbenzene Sulfonamide,
clear liquid
Uniplex 225 n­(2­Hydroxypropyl) Benzene Sulfonamide,
clear viscous liquid
Uniplex 809 PEG Di­2­Ethylhexanoate,
Clear to slightly hazy, oily liquid
Uniplex 810 PEG Dilaurate,
clear oily liquid above melting point
Ultramoll ® M NV Adipic polyester,
almost colourless, viscous liquid
Ultramoll ® III Adipic polyester,
almost colourless, viscous liquid
Ultramoll ® IV Adipic polyester,
almost colourless, viscous liquid
Ultramoll ® IV MV Adipic polyester,
almost colourless, viscous liquid
Ultramoll ® IV HV Adipic polyester,
almost colourless, viscous liquid
The workhorse liquid plasticizers for commodity
polyamides (PA6, PA66, PA11 and PA12) imparting
flexibility especially at low temperature.
Highly effective plasticizer for polyamide and
polyurethane polymers with excellent antistatic
properties. Suitable for aqueous adhesive
emulsions. Contains 6.5% water.
High molecular weight liquid plasticizer, having
wide compatibility with a variety of polymers. Its
low volatility and excellent heat resistance make
it especially useful in engineering plastics, such
as polyester and polyamide resins.
High molecular weight liquid plasticizer and
nucleating agent. Reduces moulding times
and enhances impact resistance of engineering
plastics, such as polyester and polyamide
resins.
Low­viscosity, reactive polyester for the manufacture
of pigment pastes for PU systems. Its
reaction with isocyanates allows the production
of articles with sparkling colours.
High viscosity polymeric plasticizer for oil,
grease and fuel­resistant applications of PVC,
NBR and PU systems. It is particularly suitable
for the manufacture of foodstuff packaging.
High viscosity polymeric plasticizer for oil,
grease and fuel­resistant applications of PVC,
NBR and PU systems. Ultramoll ® IV was specially
developed for films based on polyvinyl
chloride (PVC) for example cling films, which
are expected to have good migration resistance
in combination with a good processibility.
Medium viscosity polymeric plasticizer for oil,
grease and fuel­resistant applications of PVC,
NBR and PU systems. In comparison to other
high viscosity polymeric plasticizers Ultramoll ®
IV MV shows a good processibility because
of its lower viscosity and the lower dissolution
temperature. The composition of Ultramoll ® IV
MV meets a large number of European and
US food regulations.
High viscosity polymeric plasticizer for oil,
grease and fuel­resistant applications of PVC,
NBR and PU systems. It is particularly suitable
for the manufacture of foodstuff packaging. The
main difference between Ultramoll ® IV HV and
Ultramoll ® IV is the former‘s lower tendency to
migrate.