PERfoRMaNcE ENERGIzEd BY - LANXESS

PlaSTIcIzERS
Product chemical composition application
Mesamoll ® Alkyl sulphonic phenyl ester, slightly
yellowish, clear liquid
Mesamoll ® II Alkyl sulphonic phenyl ester,
slightly yellowish, clear liquid
Mesamoll ® TP
LXS 51067
Mixture of Alkyl sulfonic phenyl
esters, almost colourless, liquid
Unimoll ® AGF Mixture of glycerol acetates,
yellowish, low viscosity liquid
Adimoll ® DB
Uniplex 160
Di­n­butyl adipate,
water­clear liquid
Uniplex 165 Di­iso­butyl adipate,
water­clear liquid
Adimoll ® DO
Uniplex 125A
Di­2­ethylhexyl adipate,
clear liquid
Adimoll ® BO Benzyl­2­ethylhexyl adipate,
clear liquid
Uniplex DBS Di­butyl sebacate,
clear liquid
Uniplex DOS Di­2­ethylhexyl sebacate,
clear colourless liquid
General­purpose plasticizer with good gelling behaviour
and saponification resistance. Suitable for use with many
types of polymers including PVC and polyurethanes.
General­purpose plasticizer with good gelling behaviour
and saponification resistance. Suitable for use with many
types of polymers including PVC and polyurethanes. The
main difference between Mesamoll ® II and Mesamoll ® is
the former‘s lower volatility and FCN. Mesamoll ® II meets
a large number of US food applications.
General­purpose plasticizer with an excellent gelling
behavior, suitable for use with many types of polymers
including PVC and polyurethanes.
Plasticizer for PVC developed for applications, especially
for films requiring food contact approval.
Plasticizer for melt processable cellulose esters (CAB,
CP), vinyl chloride­vinyl acetate copolymers (VCVAC),
polyvinyl chloride (PVC; carrier for active ingredients),
nitrocellulose and polyurethane systems. Adimoll ® DB
has a very low viscosity, enabling the manufacture of
highly filled pigment batches.
Effective plasticizer for imparting low temperature flexibility
to various polymers, inclusive cellulose acetate
butyrate, cellulose nitrate, vinyl acetate, vinyl chloride,
and vinyl chloride acetate. Uniplex 165 meets US food
regulations.
Low temperature resistant plasticizer with good light
stability and an excellent plasticizing effect when used
with PVC, PVAC, NBR and other polymers. The low
viscosity combined with its weak ability to solvate PVC
has a positive effect on the initial viscosity and storage
stability of plastisols. The product meets a large number
of European and US food regulations.
Effective plasticizer for low­temperature­resistant applications
of PVC­P, PVAC, and rubbers. It is particular beneficial
to use Adimoll ® BO when PVC compounds with low
temperature resistance and light stability are required,
together with high elasticity.
Low temperature plasticizer suitable for use with many
types of polymers including PVC, PS, cellulose acetate
butyrate, cellulose acetate propionate, ethyl cellulose,
polyvinyl butyral, polyvinylidene chloride, and nitrile and
chloroprene rubber.
Effective plasticizer for low­temperature­resistant applications
of PVC­P, PS, cellulosics and polychloroprene. In
PVC Uniplex DOS exhibits excellent blend of properties
such as excellent plasticizing efficiency, and an excellent
low temperature flexibility combined with low volatility.