Catalogue Security Technology

Explosion Proof Housings
Explosion-Proof Housings for hazardous areas
SX-10000 Heater 24 V AC, RAL7032 grey
SX-10001 Heater 230 V AC, RAL7032 grey
SX-10000R For low temperatures, heater 24 V AC, RAL7001, silver-grey
• Suitable for our BOX cameras
• Non-corrosive die-cast aluminium
• Bicomponent polyurethane enamel with orange peel effect, robust
• IP66 weatherproof
• 2 x Ex d 3/4“ GAS cable glands according to the housing marking
• External dimension: 210 x 427.5 mm
• Internal dimension: 180 x 380 mm
• Internal useable area: 100 x 100 x 280 mm
• Glass window: 114 mm
• Operating temperature with heater: -20°C ~ +50°C
• Supplied with instruction manual and conformity declaration
Certificates:
• IECEx Ex d IIC T6 Ex tD A21 IP66 T85°C
• ATEX II 2 GD Ex d IIC T6 tD A21 IP66 T85°C
• GOST-R 1 ExdIICT6 + DIP A21 TA T6
SX-10000R: Special painting (RAL7001) and improved heater (up to
-40°C). Resistant to stress cracking, adverse weather conditions,
detergents, salt-spray and typical airborne pollutants.
Accessories
SX-20000 Sun shield 640 mm for housing SX-10000 series
Explosion-Proof Housings for Thermographic Cameras
SX-10000G Heater 24 V AC, RAL7032 grey
SX-10000RG Heater 24 V AC, RAL7001 silver-grey
• Non-corrosive die-cast aluminium / For thermographic cameras
• With 114 mm Germanium window glass: transmission from 7.5 to 14
µm IR range with the best optical quality
• Bicomponent polyurethane enamel with orange peel effect, robust
• IP66 weatherproof
• 2 x Ex d 3/4“ GAS cable glands according to the housing marking
• External dimensions: 210 x 427.5 mm
• Internal dimensions: 180 x 380 mm
• Internal useable area: 100 x 100 x 280 mm
• Glass window: 114 mm
• Operating temperature with heater: -20°C ~ +50°C
• Supplied with instruction manual and conformity declaration,
• one multiconductors armoured cable normally supplied 7.5 m lenght,
20.8 diameter (with 25pol. 0.5 mm / 4pol. 1 mm / 2 x RG175, 75 Ohm)
Certificates:
• IECEx Ex d IIC T6 Ex tD A21 IP66 T85°C
• ATEX II 2 GD Ex d IIC T6 tD A21 IP66 T85°C
• GOST-R 1 ExdIICT6 + DIP A21 TA T6
SX-10000RG: Special painting (RAL7001) and improved heater (up to
-40°C). Resistant to stress cracking, adverse weather conditions,
detergents, salt-spray and typical airborne pollutants.
Explosion Proof Housings & Accessories
Explosion-Proof Housing with Glass Protection Device
SX-10002 Heater 24 V AC, RAL7032 grey
SX-10002R Heater 24 V AC, RAL7001 silver-grey
• Suitable for our BOX cameras
• Housing made of non-corrosive die-cast aluminiumm, glass protection device
• Bicomponent polyurethane enamel with orange peel effect, robust
• IP66 weatherproof
• 2 x Ex d 3/4“ GAS cable glands according to the housing marking
• External dimension: 250 x 573.5 mm
• Internal dimension: 180 x 460 mm
• Internal useable area: 100 x 100 x 360 mm
• Glass window: 70 x 56 mm
• Glass protection device: 250 x 140 mm
• Mylar film 80 mm wide, 18 m length ( with ca. 350 shifting steps )
• Operating temperature with heater: -20°C ~ +50°C
• Supplied with instruction manual and conformity declaration
Certificates:
• IECEx Ex d IIC T6 Ex tD A21 IP66 T85°C
• ATEX II 2 GD Ex d IIC T6 tD A21 IP66 T85°C
• GOST-R 1 ExdIICT6 + DIP A21 TA T6
SX-10002R: Special painting (RAL7001) and improved heater (up to -40°C). Resistant to
stress cracking, adverse weather conditions,
detergents, salt-spray and typical airborne pollutants.
Accessories
SX-20001 Sun shield 760 mm for housings of the SX-10000 series
Spare Parts - Explosion-Proof Housings
SX-20009 Ex d 1/2” GAS IP66 ATEX - cable gland for SX-1000x series
SX-20010 Ex d 3/4” GAS IP66 ATEX - cable gland for SX-1000x series
SX-20012 Gaskets for cable glands Ex d 3/4” GAS IP66 ATEX not armored
SX-20014 Front flange with glass for housing SX-1000x, RAL7032
SX-20011 Front flange complete with glass protection for SX-1000x
housing, RAL7032
SX-20013 Mylarfilm replacement kit, 18 m, 350 steps
SX-20015 Internal slide with heater for housing SX-10000/100001
SX-20016 Internal slide with heater for housing SX-10002
SX-20017 Plug for 3/4” cable clamp
EFB-Security 82 83
Bracket and Swivel
for SX-10000 to SX-10006 explosion-proof housing
SX-20004 Swivel for housing series SX-10000, RAL7032, grey
SX-20004R Swivel for housing series SX-10000, RAL7001, silver-grey
SX-20005 Bracket and swivel
for housing series SX-10000, RAL7032, grey
SX-20005R Bracket and swivel
for housing series SX-10000, RAL7001, silver-grey
• Manufactured in anticorodal aluminium alloy
• Maximum capacity: ca. 35 kg
• Only swivel allows the application in different installations
• SX-20004/5R: Version available with special painting for low temperature
applications (RAL7001)