Catalogue Security Technology

Telemetry Receivers
Mini Telemetry Data Receiver, 8 functions
SV-12000 Mini telemetry receiver, 24 V AC, 50/60 Hz
• Remote control of a Pan & Tilt head and motor-driven lenses
• 8 Functions: UP, DOWN, LEFT, RIGHT, ZOOM TELE, ZOOM WIDE, FOCUS NEAR,
FOCUS FAR
• Direct installation in SG-1000x and SG-1100x housings
• Power supplied to the positioning device: AC 24 V /
• Lens: DC 12 V (polarity inversion lenses)
• Serial input RS485 (max. distance 1200 m from Matrix Series SM or controller keyboard)
• 32 indentification addresses, selectable by dip switch
• Dimensions: 100 x 60 mm
• Incl. instrcution manual, 1 x support plate, 4 x spacers, 2 x fixing screws
Telemetry Receiver, 12 functions, IP56
SV-12001 Telemetry-Receiver, 230 V AC, 50Hz
SV-12002 Telemetry-Receiver, 24 V AC, 50/60 Hz
• IP56 plastic material enclosure
• 12 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE,
FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX
• RS232, RS485 and over coax selectable communication, for max.
distance of 1200 m
• Dimensions: 225 x 154 x 81 mm
• Operating temperature: -20°C ~ + 50°C
• Incl. instruction manual, 2 x PG11 blanking caps, 4 wall mounts with
relevant fastening screws, 4 x PG11 cable glands
The SV-12001 is a digital receiver, controlled by a microprocessor,
for remote control of a Pan & Tilt motor and a motor-driven
zoom lens .
Telemetry-Receiver, 13 functions, for SV-10009P
SV-12003 Telemetry-Receiver, 230 V AC, 50Hz
• IP56 plastic material enclosure
• 13 Features: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR,
FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2
• 99 selectable address through dip switches
• Serial Input selectable: RS232 or RS485
• Remote controllable up to 1200 m (RS485)
• PRESET/ SCAN/ PATROL functions, 4 alarm contacts
• Ability to memorize up to 14 preset functions
• Dimensions: 255 x 200 x 100 mm
• Operating temperature: 0°C ~ +45°C
• Incl. instruction manual, 6 x PG11 blanking caps, 4 x wall mounts with relevant fastening screws
The SV-12003 is a microprocessor controlled digital receiver for remote control of variable speed
Pan & Tilt motor (SV-10009) and a motor-driven zoom lens .
Telemetry-Receiver & Accessories
Telemetry-Receiver, 17 functions, IP56
SV-12004 Telemetry-Receiver, 230 V AC, 50Hz
SV-12005 Telemetry-Receiver, 24 V AC, 50/60 Hz
• IP56 plastic material enclosure
• With standard preset
• Serial input selectable: RS232,RS485 or Current Loop up to 1200m
• 17 Features: UP, DOWN, LEFT, RIGHT, AUTO, WASHER, WIPER, ZOOM TELE, ZOOM WIDE,
FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2, AUX3, AUX4
• 999 selectable address through dip switches
• PRESET/ SCAN / PATROL functions with an automatic recognition of the existing functions
• Ability to memorize up to 40 PRESET functions (P&T motor, lens)
• Dimensions: 337 x 237 x 128 mm
• Operating temperature: 0 °C ~ +50 °C
• Incl. instruction manual, 6 x blanking caps PG11, 4 x wall mounts with relevant fastening
screws
Plug-In-Card for SV-12004
for data receiving via coax cable
SV-12006 Plug-in-card for
telemetry receiver SV-12004
• For matrix of the SM-series
• Receive data with SV-11001, SV-11002, SV-11005, SV-11006 via coax
cable
• Max distance from matrix: 350 m
EFB-Security 100 101
Optional card for remote control of wiper and
washer SE-20018, SE-20019 and SE-20020
SV-12008 Card for remote control of wiper and
washer
• Control of wiper and water pump of SE-20018 / SE-20019 / SE-20020
• RS485 communication
• Remote controllable up to 1200 m from the control keyboard
• 32 selectable address through dip switch
• Easy installation
Serial Data Distributor
SV-12007 1 x RS485 Input,
8 x RS485 Output, 230 V AC, 50Hz
• Metal enclosure
• Ability to cascade connection to other units
• Dimensions: 222 x 185 x 40 mm, Colour: grey
• Operating temperature: 0°C ~ +45°C
• Shipment: instruction manual, 8 x phone cable 6/6 straight through,
length about 150 cm, 8 x RJ jack connection boxes
SV-12007 is a serial data distributor used to increase the lines of
SV-12000, SV-12001, SV-12003 and SV-12004 receivers .