Automatic SIM Block & Unblock, Trace a number & Emergency Utility ...

Case 1: Let’s say there are two areas, area1 and area2, having a BTS on each.
RAB, RAB1 and RAB2, are on charge of these two areas respectively. The user,
who is in area1, gets involved to an incident and wants to inform RAB. He might
be in such a place that both the BTS covers-up, known as overlap zone (shaded
region in the figure). But he is supposed to inform RAB1 as he is in area1. If all
the channels of the BTS in area1 are busy or if the signal strength of BTS of
area2 dominates that of area1 then the BTS in area2 would be covering him, in
which case, the user would be considered under the BTS of area2. In auto
detection process, area2 is going to be detected which would have been wrong.
As area2 BTS is detected so the automatic system will inform the RAB2 instead
of RAB1, which would not be the right one. As a result RAB2 will have a false
alarm and the victim will not receive any help regarding her incident, as RAB1 is
not being informed.
Figure 1
15