SmartFade ML v3.0.1 Release Note - ETC
SmartFade ML v3.0.1 Release Note - ETC
SmartFade ML v3.0.1 Release Note - ETC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ETC</strong> <strong>Release</strong> <strong>Note</strong>:<br />
<strong>SmartFade</strong> <strong>ML</strong> <strong>v3.0.1</strong> Software<br />
Step 8: Start the console in test mode. This is done by holding down the MENU button and<br />
pressing once on ON.<br />
The unit will enter self-test mode. Press MENU for each of the tests until the memory<br />
test has completed. At the end of the memory test the display will prompt:<br />
Firmware Upgrade<br />
Are you sure? [No]<br />
Step 9: Once the connection with the console is recognized, the status information will display<br />
the Bootloader Version, and then “Please Load Firmware File”. The FILE button will be<br />
displayed with solid text.<br />
Click FILE and select the SMRTFD<strong>ML</strong>.SRC file.<br />
Step 10: Now the DOWNLOAD button will be displayed with a solid text.<br />
Click on DOWNLOAD to start downloading. The progress bar will begin to move. When<br />
the download is complete, the console will boot into the new updated software.<br />
Issues Corrected in <strong>v3.0.1</strong><br />
RND 0016298 High End Studio Color 250 doesn't have correct home value for Color Control (address 5)<br />
RND 0016032 Insert/Change step: Show recorded memories on the bump LEDs<br />
RND 0015806 Some Color Mix attributes are not correctly inverted, eg HES Studio Command 700<br />
RND 0015805 Update live step: Should not change up and down times<br />
RND 0015804 Deleting stack steps gives confusing step numbering for next GO<br />
RND 0015801 Personalities: Add support for Desire<br />
RND 0015755 CMY parameters are not shown properly on the encoders<br />
RND 0015754 Effects: Fan on linear effects isn't recorded properly in memories<br />
RND 0015398 Inserting a step into an empty stack can cause issues<br />
RND 0014761 Changing user color palettes, saving and re-reading them does not give the same output in some cases.<br />
RND 0014667 SD-card: Add support for SDHC cards using new library<br />
Known Issues Remaining in <strong>v3.0.1</strong><br />
RND 0010491 Effects start when Move Dark is activated by the completion of the previous Cue<br />
RND 0000338 Palette info displayed for parameters when operating in INT ONLY mode<br />
RND 0000316 Home value offered for Intensity in User Personality, but cannot be used.<br />
<strong>SmartFade</strong> <strong>ML</strong> <strong>v3.0.1</strong> <strong>Release</strong> <strong>Note</strong> Page 4 of 4 Electronic Theatre Controls, Inc.
Change language