1-800-ROTUNDA - Ford Rotunda - SPX

More documents

Recommendations

Info

BRAKE SERVICE CLIMATE CONTROL SERVICE COLLISION REFINISHING COLLISION REPAIR FACILITY FLUID HANDLING GENERAL SHOP EQUIPMENT LIFTING EQUIPMENT PARTS STORAGE POWERTRAIN SERVICE SHOP FURNITURE STARTING & CHARGING SYSTEMS VEHICLE DETAILING VEHICLE DIAGNOSTICS WHEEL SERVICE 1-800-ROTUNDA MARK 6 SERIES BENCH SYSTEM For unmatched adaptability and efficient use of floor space, the Mark 6 Mobile System can be moved from workstation to workstation. The system can also be mounted onto an in-ground scissor lift and used with the Car-O-Tronic electronic measuring system. SUPPLIED BY: CAR-O-LINER FEATURES: • 10-ton Draw Aligner offers nearly continuous adjustment with 11° between each setting — the Draw Aligner makes the correct angle easy to find. This increased adjustment capacity reduces the number of re-adjustments needed while pulling. In addition, Mark 6’s powerful Draw Aligner moves 360° around the system and has a built-in height extension for making higher pulls, faster. • Finely milled steel frame provides a smooth, level surface for measuring equipment to rest on, resulting in to-the-millimeter accuracy. • Optional side support system used to hold undamaged and already repaired components in place while pulling other areas. Also facilitates pushing, up pulls and down pulls. • Standard Chassis Clamps and optional clamps hold vehicles securely even under the full 10-ton force of the Draw Aligner. • With the lift package, a hydraulic lift allows the working height to vary up to a maximum of 54". Repairs are made faster and easier because the damaged area is easier to see and reach. In addition, by allowing the work to be performed in an upright position, the Mark 6 drive-on system reduces back, knee and shoulder fatigue that can slow down the most skilled technician. ITEMS: 345-34574 Mark 6 Base Frame with Lift 345-34429 Mark 6 Ramp Kit 345-32756 Power Unit 345-30774 Hydraulic Oil 345-30346 10-ton Draw Aligner 345-701 10-ton Hydraulic Pump, Hose and Cylinder Set 345-205 Ram Adapter 345-30176 Bench Parts 345-34586 Wheel Kit 345-33192 Mark 6 Base Frame SPECIFICATIONS: • Platform length: 13' 4" (4,060 mm) • Platform width: 2' 11" (900 mm) • Maximum height (floor to top of platform): 4' 6" (1360 mm) • Maximum length (with draw aligner): 17' (5180 mm) • Maximum width (with draw aligner): 6' 8" (2,020 mm) • Weight: 1,496 lbs. (680 kg) • Lift capacity (max. vehicle weight): 6,160 lbs. (2,800 kg) • Pulling force per draw aligner: 10-ton • Power unit: 110 volt, 60 Hz, single phase 4-8 For current pricing visit www.onerotunda.com Flexible, mobile bench system allows for customization to optimize floor space — can be mounted aboveground (photo above) or in-ground (photo below). Taller bench arms allow maximum work space between the bench and underside of the vehicle.
1-800-ROTUNDA SUPPLIED BY: CAR-O-LINER 4-9 For current pricing visit www.onerotunda.com Repair cosmetic damage, freeing larger lifts for more advanced repairs. Save space with in-ground installation. SPEED OR SPEED PLUS BENCH Speed is our most compact lift-based repair system suitable for vehicles with light damage. Easy to install and easy to use, this versatile lift platform allows you to make efficient use of space in your shop. Because there are no ramps or posts around the lift, accessibility is excellent, improving ergonomics to repair vehicles faster. Speed is ideal for a range of different tasks such as sheet metalwork, assembly, disassembly, door adjustments, sanding, masking and other preparations for painting. All this, with the added capacity for light pulls using the optional draw aligner mounting. The Speed Plus allows pulling from both ends of the platform. FEATURES: • The Draw Aligner, with a capacity of 5 metric tons, is infinitely adjustable and self-locking, allowing you to easily set and lock the exact position required. It can be rotated within a large area so you can work more efficiently. With Speed Plus, a draw aligner can be attached to both ends of the platform. • Setup is fast and easy using CAR-O-LINER’s easy-on/easy-off attachments. • Unique bench arms are vertically adjustable, making it easy to install the chassis clamps. • Vehicles can be easily driven over the platform due to Speed’s low profile of only 4". Low 4" profile to drive/roll the car over the lifting platform — save cost with no ramps or additional equipment needed. ITEMS: 345-34575 Speed Frame and Lift with Lift Arms 345-34576 Speed Plus Frame and Lift 345-33045 5-ton Draw Aligner 345-725 5-ton Hydraulic Pump, Hose and Cylinder Set 345-32756 Power Unit 345-30774 Hydraulic Oil 345-32868 Height Extension 60 mm (4 required) 345-40850 Speed Bench Part SPECIFICATIONS: • Platform length (Speed): 8' 3" (2,510 mm) • Platform length (Speed Plus): 9' 4" (2,845 mm) • Platform width (with arms): 3' 1" (950 mm) • Maximum height (floor to top of platform): 5' 3" (1,600 mm) • Maximum length (with draw aligner): 11' 10" (3,600 mm) • Maximum width (with draw aligner): 8' 2" (2,486 mm) • Weight: 1,371 lbs. (600 kg) • Lift capacity (max. vehicle weight): 5,500 lbs. (2,500 kg) • Pulling force per draw aligner: 5-ton • Power unit: 110 volt, 60 Hz, single phase BRAKE SERVICE CLIMATE CONTROL SERVICE COLLISION REFINISHING COLLISION REPAIR FACILITY FLUID HANDLING GENERAL SHOP EQUIPMENT LIFTING EQUIPMENT PARTS STORAGE POWERTRAIN SERVICE SHOP FURNITURE STARTING & CHARGING SYSTEMS VEHICLE DETAILING VEHICLE DIAGNOSTICS WHEEL SERVICE
Page 2 and 3: CATALOG PRICING FOR CURRENT ROTUNDA
Page 4 and 5: 1-800-ROTUNDA II For current pricin
Page 6 and 7: 1-800-ROTUNDA IV For current pricin
Page 8 and 9: 1-800-ROTUNDA VI For current pricin
Page 10 and 11: SUPPLIERS FEATURED IN THIS SECTION:
Page 12 and 13: BRAKE SERVICE CLIMATE CONTROL SERVI
Page 88 and 89:
SUPPLIERS FEATURED IN THIS SECTION:
Page 90 and 91:
BRAKE SERVICE CLIMATE CONTROL SERVI
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
1-800-ROTUNDA AUTHORIZED SERVICE SO
Page 172 and 173:
1-800-ROTUNDA AUTHORIZED SERVICE SO
Page 174 and 175:
1-800-ROTUNDA New Rotunda Number It
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
1-800-ROTUNDA For current pricing v
Page 268 and 269:
1-800-ROTUNDA Computerized Electron
Page 270 and 271:
1-800-ROTUNDA Parts Spray Wash Cabi
Page 272 and 273:
1-800-ROTUNDA 17-6 For current pric
Page 274 and 275:
TERMS & CONDITIONS 1.) Terms of Pay
Page 276:
LITHO IN U.S.A. RTC1-812 10% post-c
show all

1-800-ROTUNDA - Ford Rotunda - SPX

Create successful ePaper yourself

Delete template?

Save as template?