1-800-ROTUNDA - Ford Rotunda - SPX

1-800-ROTUNDA
223-4015EFO
15,000 lb. capacity
Four-Post Open Front Lift
(Also available in closed front.)
SURFACE-MOUNTED FOUR-
POST LIFT
The 15,000 lb. capacity four-post lift from
Challenger Lifts is available in open front or
closed front models along with 182-1/2" or
210" wheelbases.
ITEMS AND SPECIFICATIONS:
Item # 223-4015EFO
Lifting capacity 15,000 lbs.
Length overall 20' 9"
Width overall
11' 10" front —
11' 2-1/2" rear
Inside columns 120"
Between columns 195"
Height of columns
8' 3-1/2" front —
7' 9-1/2" rear
Height of runways 7"
Width of runways 20"
Width between runways 43"
Maximum wheelbase 182-1/2"
Rise height 78"
Air supply required
90 – 120 p.s.i. clean
& dry
Motor 2 hp
Voltage (1 phase std.) 208 – 230 volt
Speed of Rise 85 seconds
Minimum recommended bay size 12' x 24'
OPTIONAL ACCESSORIES:
223-RJ7.5 7,500 lb. rolling jack.
223-10266 36" long Four-post lift drive-thru
ramp kit.
223-10267 32 gallon capacity rolling oil
drain pan.t
SUPPLIED BY: CHALLENGER LIFTS
223-CL10V3-DPC*
Max Plus Productivity
Solution Versymmetric Two-Post
with 3-stage front and 3-stage rear
arms, dual pendant power controls,
document holder and 223-10315
stack adapter kit.
TWO-POST LIFTS
ITEMS AND SPECIFICATIONS:
8-11
For current pricing
visit www.onerotunda.com
223-CL10V3
Versymmetric Two-Post
with 3-stage front and
3-stage rear arms.
Item # 223-CL10V3/223-CL10V3-DPC 223-E12 223-15000 223-18000
Lifting capacity 10,000 lbs. 12,000 lbs. 15,000 lbs. 18,000 lbs.
Rise height 74-1/8" 78-1/8" 85-1/2"
Column height 11' 8" † 13' 10" or 14' 7" 14' 6"
Adjustable width overall 11' 6-1/2" or 11' 11" 11' 7-3/4" 12' 10-3/4"
Drive-thru clearance 100" or 2" – 105-1/2" 103" 104-1/4"
Floor to overhead switch 11' 2-1/2" 13' 3-1/2" or 14' 1/2" 13" 11"
Front arm reach (minimum/
maximum)
Rear arm reach (minimum/
maximum)
223-10318
19-13/16"/42" 35-3/4"/54-1/2" 38-1/2"/62"
37-5/8"/60" 35-3/4"/54-1/2" 38-1/2"/62"
Screw pad height adj. 3-7/8" – 6-1/8" adj. 5-1/4" – 7-1/4" adj. 6-5/8" – 8-1/2"
with short adapter* 6-7/8" – 9-1/8" 8-1/4" – 10-1/4" 10-5/8" – 12-1/2"
with tall adapter* 9-7/8" – 12-1/8" 11-1/4" – 13-1/4" 14-5/8" – 16-1/2"
Motor/voltage 2 hp/208 – 230 volt
Speed of rise 48 seconds 66 seconds 80 seconds
223-10315
3 hp/208 –
230 volt
Maximum load per arm 2,500 lbs. 3,000 lbs. 3,750 lbs. 4,500 lbs.
Ceiling height required 12' 13' 11" or 14' 8" 14' 7"
† Cylinder strokes to 11' 11".
Frame engaging adapters (223-10314 or 223-10318) are required when lifting
vehicles with frame construction. All Challenger 12,000 lb. capacity and higher
two-post lifts include Stack Adapters and Frame Engaging Adapters.
* Short and tall adapters are optional for 223-CL10V3.
NOTE: 2' and 3' height extensions available. Single phase standard, optional 3 phase
electrical available; please specify at time of order.
ACCESSORIES:
223-10315 Stack pad kit for 10,000 lb. lift includes
(4) 3" stack adapters; (2) 6" stack adapters and
(2) organizer racks. Included with 223-CL10V3-DPC*
223-B10264A Air/electric workstation with filter/lubricator/regulator
223-10318 Frame engaging adapters
223-B10264A
BRAKE
SERVICE
CLIMATE
CONTROL
SERVICE
COLLISION
REFINISHING
COLLISION
REPAIR
FACILITY
FLUID
HANDLING
GENERAL SHOP
EQUIPMENT
LIFTING
EQUIPMENT
PARTS
STORAGE
POWERTRAIN
SERVICE
SHOP
FURNITURE
STARTING &
CHARGING
SYSTEMS
VEHICLE
DETAILING
VEHICLE
DIAGNOSTICS
WHEEL
SERVICE