Tesis previa a la obtención del Título de Ingeniero en Electrónica y ...

ame reínstatement sequence C
¡thout consíderation of restricted networks)
Is current outgoing signal
64 kbit/s data? (mode 10)
Is current outgoing signal
64 kbit/s video?
Is current outgoing signal
audío mode 1 ?
Fhe current mode must be
PCM audio.
ime reinstatement sequence C
)p!Ícat¡on to restricted networks)
!s current outgoing signal
56 kbit/s data?
s current outgoing signal
56 kbit/s video?
N
s current outgoing signal 56
tbit/s
)f Recommendation G.722?
fhe current mode must be
3CM audio.
Y
Y
Send framed signal wíth suitable data command (62.4 kbit/s or less) — note
that data is corrupted in the receiver until FAS is recovered at other end;
interleave neutral-cap if relevant.
Send framed signal with (000) [31] and (010) [1]- note thatvideo is corrupted
in the receiver until FAS is recovered at other end; ¡nterleave neutral-cap if
relevant.
Overlay framing without mode change; use (000) [6] and interleave neutralcap
if relevant.
Send mode OF with (000) [18 or 1 9] and interleave neutral-cap if relevant.
Send framed signal with suitable data command (54.4 kbit/s or less) — note
that data is corrupted in the receiver until FAS is recovered at other end;
interleave neutral-cap if relevant.
Send framed signal with (000) [31] and (010) [1 or 2] - note that video is
corrupted ¡n the receiver until FAS is recovered at other end; interleave
neutral-cap ¡f relevant.
Overlay framíng without mode change and interleave neutral-cap if relevant.
SendmodeOF with (000) [18 or 1 9] and interleave neutral-cap ¡f relevant.
FIGURE 1/H.242