poltroncina auto gr. 01 elite - Neo Baby
poltroncina auto gr. 01 elite - Neo Baby
poltroncina auto gr. 01 elite - Neo Baby
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
standards.<br />
5. If in doubt, consult either the child restraint manufacturer<br />
or the retailer..<br />
INSTRUCTIONS FOR USE<br />
IMPORTANT: PLEASE READ THESE INSTRUCTIONS<br />
CAREFULLY BEFORE USE AND KEEP THEM FOR<br />
FUTURE REFERENCE. YOUR CHILD’S SAFETY MAY<br />
BE AFFECTED IF YOU DO NOT FOLLOW THESE<br />
INSTRUCTIONS CAREFULLY.<br />
DESCRIPTION OF THE CHILD CAR SEAT<br />
• This child car seat is approved for Group 0, for<br />
children from birth up to 10 kg (from birth up to<br />
approximately 9 months of age). This child car seat<br />
must be fitted only in a backward-facing position.<br />
• This child car seat is approved for Group 1,<br />
for children from 9 up to 18 kg (from 9 months<br />
up to approximately 4 years of age). This child<br />
car seat must be fitted only in a forward-facing<br />
position.<br />
<strong>01</strong>. Shoulder pads<br />
02. Base<br />
03. Safety harness<br />
04. Insert pillow<br />
05. Buckle<br />
06. Crotch strap<br />
07. Strap for adjusting the length of the safety harness<br />
08. Lever for adjusting the inclination of the seat<br />
09. Shell<br />
10. Clamp<br />
11. Button for adjusting the length of the safety harness<br />
12. Base<br />
HOW TO ADJUST THE CHILD CAR SEAT<br />
The child car seat can be adjusted to different positions<br />
to offer your child maximum comfort.<br />
• To adjust the child car seat, use the red lever located<br />
at the front of the child car seat, between the<br />
base and the shell (fig. 2).<br />
• WARNING: After adjusting the inclination of the<br />
child car seat, ensure that the car safety belt is well<br />
tensioned, and that the safety harness of the child<br />
car seat is fitted in the correct position.<br />
GROUP 0.<br />
CHILD CAR SEAT FITTED IN A<br />
BACKWARDFACING POSITION<br />
• From birth up to 10 kg<br />
• The child car seat must be fitted only with a 3-point<br />
safety belt approved to UN/ECE Regulation No.<br />
16, or other equivalent standards.<br />
• WARNING: Do not fit the child car seat into the<br />
front seat if the car is equipped with an Airbag.<br />
• Adjust the child car seat to its most vertical position<br />
(see para<strong>gr</strong>aph “HOW TO ADJUST THE CHILD<br />
16<br />
CAR SEAT”). Place the child car seat onto the front<br />
passenger, or rear seat of the car, in a backwardfacing<br />
position.<br />
• Pull the safety belt of the car completely, and insert<br />
the lap part of the car safety belt under the base of<br />
the child car seat (fig. 4A).<br />
• Insert the diagonal part of the safety belt into the<br />
guides, located at the rear of the child car seat<br />
(Please refer to the blue labels on the child car<br />
seat) (fig. 4B).<br />
• Lock the buckle of the car safety belt, and pull the<br />
belt towards the retractor.<br />
• Place the plastic clamp (fig. 1B – n. 10) onto<br />
the diagonal section of car safety belt, against<br />
the guides located on the upper part of the shell<br />
(fig. 6A and 6B).<br />
• Ensure that the car safety belt is not twisted or<br />
damaged, and that it is well-tensioned.<br />
GROUP 1.<br />
CHILD CAR SEAT FITTED IN A<br />
FORWARD-FACING POSITION<br />
• From 9 up to 18 kg<br />
• The child car seat must be fitted only with a 3-point<br />
safety belt approved to UN/ECE Regulation No.<br />
16, or other equivalent standards.<br />
• Place the child car seat onto the seat, in a forwardfacing<br />
position (fig. 7).<br />
• Pull the car safety belt, and slide the buckle<br />
through the backrest of the child car seat, between<br />
the plastic shell and the base (Please refer to the<br />
red labels on the child car seat – fig.8).<br />
• Lock the buckle of the car safety belt.<br />
• Pull the belt tightly, making it adhere correctly to<br />
the child car seat. Ensure the safety belt is fitted<br />
safely against the car seat (fig.9A).<br />
• Position the plastic clamp onto the car safety belt,<br />
near the buckle of the diagonal part of the belt<br />
(fig. 9B).<br />
• Ensure that the safety belt is well-tensioned and<br />
not twisted.<br />
CHILD CAR SEAT SAFETY HARNESS<br />
How to lock the buckle<br />
• Join the 2 prongs of the buckle side by side (fig.<br />
10A). Insert the 2 prongs into the buckle, until a<br />
CLICK is heard, indicating they have been inserted<br />
correctly (fig. 10B and 10C ).<br />
• To open the buckle, push the red button located<br />
on it.<br />
• Always ensure that your child does not unfasten the<br />
buckle of the safety harness.<br />
How to adjust the safety harness<br />
• To tension the safety harness, pull the adjustment<br />
strap, as shown in dia<strong>gr</strong>am 11.<br />
• Adjust the safety harness, until it is correctly fitted<br />
to the child’s body.<br />
• To loosen the safety harness, press the adjustment