Aerosol a pistone - Chicco

Manufacturer's Handbook and Declaration – Electromagnetic EmissionsThe Chicco piston aerosol can be used in the electromagnetic environment specified below. The customer oruser of the aerosol unit must ensure it is used in such an environmentEmissions Tests Compliance Guide to electromagnetic environmentsCISPR 11 Radiated/ConductedEmissionsGroup 1The Chicco piston aerosol only uses RF energyfor its internal functions. Therefore its RF emissionsare very low and do not cause any interferencewhen in proximity to electronic devices.CISPR 11 Radiated/ConductedEmissionsClass [B]HarmonicsClass [A]IEC/EN 61000-3-2Voltage fluctuations/flickers [Compliant]IEC/EN61000-3-3The Chicco piston aerosol is suited for use inall environments, including those domestic andthose directly connected to the public electricitydistribution line that provides power to buildingsused for domestic purposes.Manufacturer's guide and declaration – Electromagnetic ImmunityThe Chicco piston aerosol can be used in the electromagnetic environment specified below. The customer oruser of the aerosol unit must ensure it is used in such an environment.Emissions Tests Compliance Guide to electromagnetic environmentsElectrostatic discharges(ESD)IEC/EN61000-4-2±6kV on contact±8kV in airFloors should be made of wood, cement or ceramic. If thefloors are covered with synthetic material, the relative humidityshould be now higher than 30%Fast/burst transientsIEC/EN61000-4-4SurgeIEC/EN61000-4-5Voltage dips, briefinterruptions andvariations in voltageIEC/EN61000-4-11Magnetic fieldIEC/EN61000-4-8Conducted ImmunityIEC/EN61000-4-6±2kV powerThe power supply should be that typical of a commercialbuilding or hospital.±1kV differential mode The power supply should be that typical of a commercialbuilding or hospital.