Technology - Implants 2013
Technology - Implants 2013
Technology - Implants 2013
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FPS<br />
Fast Powder Sintering<br />
Eurocoating: continuous process innovations.<br />
14<br />
ONE STEP<br />
FPS is a fast sintering process. The service allows manufacturers to design and get implantable components Functionally<br />
Graded both in density (from a fully dense material to a network with large size interconnected pores) and in materials.<br />
It allows the application of macroporous titanium foams onto CoCr or Zirconia Toughened Alumina bulks, thus improving<br />
the possibility of direct osteointegration for these materials.<br />
Attend our introduction to FPS technology at <strong>Implants</strong> 2012<br />
Porous Ti cp Coatings and Co-28Cr-6Mo Substrate<br />
Simultaneously Produced by Powder Sintering<br />
Lyon Congress Centre - Friday, June 1, 10.00 a.m<br />
Authors: L. Facchini, E. Preve, F. Bucciotti and P. Robotti<br />
Eurocoating spa<br />
Via Al Dos de la Roda, 60<br />
I - 38057 - Pergine Valsugana (fraz. Ciré) - Trento - Italy<br />
Tel. +39 0461 518901 info@eurocoating.it<br />
Fax +39 0461 518902 www.eurocoating.it<br />
Ti Foam<br />
CoCr<br />
Visit us at booth #43<br />
20% of staff in R&D allowed us to develop the new implantable components<br />
that recently entered the orthopedic market.<br />
Discover more on www.eurocoating.it<br />
Partnering with<br />
SurfaceDynamics<br />
EXCELLENCE AS YOU DESIGN IT<br />
Proud members of<br />
UNITEDCOATINGS GROUP<br />
Euro_<strong>Implants</strong>_A5_Ad_07_05_2012_Orizz-rev01-e.indd 1 07/05/12 16.27