DVD Home Theater System - TEAC Europe GmbH

18
Connection to an audio component
A
B
SPEAKER
DIGITAL OUT terminal
If the component has an DIGITAL IN terminal, connect it with
an optical cable.
DIGITAL OUT (MC-DV250)
q DIGITAL IN (CD-R, MD, etc.)
< Select the proper digital output mode in accordance with
your connection (see page 72).
AUDIO IN/OUT jacks
SPEAKER
TV
AUDIO IN
SUBWOOFER
Analog 2-channel audio signal is input or output from these
jacks. Connect the component with an RCA pin cable.
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
C
L R
AUDIO IN
D
TAPE
MD, CD-R, etc. MD, VCR, etc.
DIGITAL
IN
A
L R L R
LINE IN LINE OUT
Connection 3
C
D
ENGLISH
B
AUDIO OUT
L R
Speaker Connections
CAUTION:
To avoid damaging the speakers with a sudden high-level
signal, be sure to switch the power off before connecting
the speakers.
The red speaker terminals are + (positive), and the black
terminals are _ (negative).
Connect the black side of the speaker cable to the black
terminal and the other side to the red terminal.
< If not using the included speakers, make sure the speakers
you use offer a 6 Ω impedance.
Subwoofer Connection
Connect the subwoofer with the supplied RCA pin cable.