al-ko lastenträger lst 150 - KAMA Fritid
al-ko lastenträger lst 150 - KAMA Fritid
al-ko lastenträger lst 150 - KAMA Fritid
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GB<br />
Inst<strong>al</strong>lation LST<strong>150</strong> Load Carrier<br />
18<br />
AL-KO Load Carrier<br />
1. Insert a patterned plate (2) upwards in the rear<br />
groove of the rail profi le (11) in the centre.<br />
2. Push a further rail profi le (11) with the groove onto<br />
the centre of the plate (2) fi t to the drill holes in the<br />
centre from below using 2 each M8 square nuts<br />
and disks. Fit the M8x16 bolts in the centre.<br />
3. Insert a patterned plate (2) upwards in the rear<br />
groove of the second rail profi le (11) in the centre.<br />
4. Push a further rail profi le (11) with the groove onto<br />
the centre of the plate (2) fi t to the drill holes in the<br />
centre from below using 2 each M8 square nuts<br />
and disks. Fit the M8x16 bolts in the centre.<br />
5. Push the 3 cushions on the hoops (3, 8).<br />
6. Place hoops together and preassemble using<br />
two each M8x55 screws, disks and M8 nuts.<br />
7. Pre-assemble the left hoop and the right hand<br />
hoop (3, 8) on the left had carried and the right<br />
hand carrier (4, 9) using 2 each spacers, 2 M12x80<br />
screws, large disks and M12 nuts.<br />
8. Tighten the 4 M12x80 bolts using a maximum torque<br />
of 40 Nm.<br />
9. Place plastic caps on the screw heads.<br />
10. Align the 3 rail profi les (11) and both platesn (2)<br />
in the centre.<br />
11. Align the left and the right hoop (3, 8) as well.<br />
Tighten the M8 remaining screws using torque.<br />
M 8 = 25 Nm<br />
Translation of origin<strong>al</strong> user instructions