AVIC-F900BT AVIC-F700BT - Service.pioneer-eur.com - Pioneer

Connecting the System
Section
03
! If [Ant CTRL] mode is set to [Power], the
vehicle’s aerial can be stowed or turned off
only when the ignition switch is turned off
(ACC OFF).
! Do not connect this lead to the system control
terminal of external power amps.
! Be sure not to use this lead as the power
supply lead for the auto-aerial or aerial
booster. Such connection could cause excessive
current drain and malfunction.
Connector*
Extension lead
(for reverse signal)
English
Notice for the blue/white lead
! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp’s system remote control terminal
(max. 300 mA 12 V DC). The control signal
is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-aerial
relay control terminal or the aerial booster
power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
Extension lead*
(for speed signal)
GPS aerial
RCA connector
Microphone
Parts supplied
Parts marked (*) are not supplied with AVIC-
F700BT.
The navigation unit
Power cord
Engb 7