SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nozzles Kapitel Düsen<br />
GB<br />
15<br />
E<br />
14<br />
Floor suction nozzle [E]<br />
You can adjust the floor suction nozzle with a working width<br />
of approx. 28 cm by using the change-o<strong>ve</strong>r switch [14] for the<br />
vacuuming of carpets (bristle collar retracted), or hard floors<br />
(bristle collar extended).<br />
The two thread receptacles [15] remo<strong>ve</strong> threads, hairs, fluff<br />
etc. from the carpet. If required, they can be replaced without<br />
problem since they are only inserted into the base plate to<br />
the left and right of the suction opening in each case.<br />
NOTICE!<br />
Set suction capacity medium to high.<br />
Approximate picture<br />
16<br />
Hard-floor nozzle [16]<br />
Used especially for hard-floors such as tiles, parquet or laminate.<br />
Soft brush hairs allow the nozzle to glide easily o<strong>ve</strong>r the<br />
floor and it picks up e<strong>ve</strong>n the finest dirt free of residue.<br />
NOTICE!<br />
Set suction capacity low to medium.<br />
17<br />
Textile nozzle [17]<br />
> Optional accessory<br />
Order No. 2725810<br />
Used especially for upholstered furniture, curtains or garments.<br />
Perfect dust removal through extra-large lint and thread<br />
receptacle, which remo<strong>ve</strong>s statically-clinging lint and hair.<br />
NOTICE!<br />
Set suction capacity medium to high.<br />
37