27.09.2014 Views

SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...

SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...

SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

GB<br />

If at once you don't succeed ...<br />

If at once you don't<br />

succeed …<br />

Dear customer,<br />

Our products are subject to strict quality control. If this device<br />

should not function trouble-free in spite of that, we regret<br />

this <strong>ve</strong>ry much.<br />

Before you contact our Customer Service, check whether<br />

you can correct the fault yourself.<br />

WARNING!<br />

Switch off the device and pull the power plug before you begin<br />

with any fault location. This pre<strong>ve</strong>nts the device being<br />

switched on by mistake.<br />

Fault Possible cause Remedy<br />

Device does not run. Plug is not insertedt. Insert plug.<br />

Device is not switched on. Switch on device.<br />

Power outlet does not carry<br />

any power.<br />

Use another power outlet<br />

Power cable is damaged. Bring device in for repair.<br />

Device does not Dust bag / filter are full and/or Change dust bag / filters<br />

vacuum<br />

clogged.<br />

Hose, pipes, nozzles are Eliminate clogging.<br />

clogged up.<br />

Device runs Sucked in particles ha<strong>ve</strong> Remo<strong>ve</strong> particles.<br />

unusually loud. become jammed.<br />

If you cannot correct the fault yourself, please refer to our<br />

Service-Hotline<br />

01805 325474<br />

12 cent / minute<br />

from the landline network of Deutsche Telekom<br />

Before the call, it is absolutely necessary that Article No.<br />

and Equipment / Model Designation are held ready.<br />

You can find these specifications on the rating plate of the<br />

device.<br />

46

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!